Going to have to try this route first. There is a spring vendor online, but at seven bucks apiece plus shipping, I'll use them as a last resort.
The spring currently on this receiver looks like it would fit on a Holley 650 ;-) TNX / 73, Steve, W1ES/4 -----Original Message----- >From: Garey Barrell <[email protected]> >Sent: Dec 4, 2011 10:08 PM >To: Steve Wedge <[email protected]> >Cc: [email protected] >Subject: Re: [Drakelist] Sources for PTO return spring? > >Steve - > >I found a suitable spring at an ACE hardware store a few years ago. They have >the little plastic >boxes with about 15 compartments in each one that are full of all sorts of odd >things. Knurled >thumb screws, Lamp hardware, odd pieces of hardware, and on had a whole >selection of springs. I >probably should have bought all they had, but I only needed one! I think it >cost me 35 cents. > >73, Garey - K4OAH >Glen Allen, VA > >Drake 2-B, 2-C/2-NT, 4-A, 4-B, C-Line >and TR-4/C Service Supplement CDs ><www.k4oah.com> > > >Steve Wedge wrote: >> I'll likely remove the braid to the rear of the slug rod, but I really need >> to find a spring that >> will work properly on the PTO from the locations where it's supposed to be >> (yoke to PTO shield). >> Does anyone know of a source for those little springs? >> _______________________________________________ Drakelist mailing list [email protected] http://mailman.zerobeat.net/mailman/listinfo/drakelist
