A number of years ago I bought about four AC4's, and installed 3-prong computer
cords, with the ground attached to the AC4 chassis. I used the original strain
relief, but carefully cut some of the plastic out of the original, just enough
to accomodate the round cord. They all worked great. One thing I did not
consider (and I need to go back and look), is the hot lead of the AC cord being
on the fuse. I suppose for safety reasons I should have???
73,
Mark
N5KAE
>
>From: Gary Poland <[email protected]>
>To: John Gartman <[email protected]>; DrakeList Zerobeat
><[email protected]>
>Sent: Thu, January 19, 2012 8:43:08 PM
>Subject: Re: [Drakelist] AC-4
>
>
>John,
> As you suggested it would be easiest to just cut it off at the strain relief
>and re-terminate inside. You will only lose about 6 to 8 inches at best.
>
>73, Gary
_______________________________________________
Drakelist mailing list
[email protected]
http://mailman.zerobeat.net/mailman/listinfo/drakelist
