It could also be as simple as the molex pins on the digital readout board.
Pry the board out a bit and re-seat them. Look the pins over for any cracks
in the solder.
Good luck!
Darrel, N0DBX
On 08/23/2018 11:49 AM, DW Harms (Dick) wrote:
Ciao Demis, your PLL needs adjustment I think 😉
You know how to do that?
73, Dick PA2DW
Op 23 aug. 2018 om 18:29 heeft Demis Bertoni <iz4...@gmail.com> het volgende
geschreven:
Hello!
I've a Drake R7A with a problem on changing frequency band.
What happens is shown below:
BAND SWITCH DISPLAY
0-0.5 0-500 OK
0.5-1.0 500-1000 OK
1.0-1.5 1000-1500 OK
1.5-2.0 99500-0 ?
2.5-3.0 500-1000 ?
3.5-4.0 1500-2000 ?
5.0-5.5 5000-5500 OK
7.0-7.5 5000-5500 ?
14.0-14.5 11500-12000 ?
21.0-21.5 21000-21500 OK
28.5-29.0 26500-27000 ?
Please someone who can help me solve the problem?
Thank you and 73!
Demis IZ4ORS
IZ4ORS - Demis Bertoni
Via Rebecchi, 13 - 41015 Nonantola
(Modena) - Italy
_______________________________________________
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
_______________________________________________
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
_______________________________________________
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist