Hi Sam,
Thank you for the patch.
On Mon, Dec 02, 2019 at 08:32:17PM +0100, Sam Ravnborg wrote:
> Use the backlight support in drm_panel to simplify the driver
>
> Signed-off-by: Sam Ravnborg <s...@ravnborg.org>
> Cc: Thierry Reding <thierry.red...@gmail.com>
> Cc: Sam Ravnborg <s...@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
> ---
> drivers/gpu/drm/panel/panel-lvds.c | 40 ++++--------------------------
> 1 file changed, 5 insertions(+), 35 deletions(-)
>
> diff --git a/drivers/gpu/drm/panel/panel-lvds.c
> b/drivers/gpu/drm/panel/panel-lvds.c
> index 5e40b674bb15..5ce3f4a2b7a1 100644
> --- a/drivers/gpu/drm/panel/panel-lvds.c
> +++ b/drivers/gpu/drm/panel/panel-lvds.c
> @@ -8,7 +8,6 @@
> * Contact: Laurent Pinchart (laurent.pinch...@ideasonboard.com)
> */
>
> -#include <linux/backlight.h>
> #include <linux/gpio/consumer.h>
> #include <linux/module.h>
> #include <linux/of_platform.h>
> @@ -34,7 +33,6 @@ struct panel_lvds {
> unsigned int bus_format;
> bool data_mirror;
>
> - struct backlight_device *backlight;
> struct regulator *supply;
>
> struct gpio_desc *enable_gpio;
> @@ -46,19 +44,6 @@ static inline struct panel_lvds *to_panel_lvds(struct
> drm_panel *panel)
> return container_of(panel, struct panel_lvds, panel);
> }
>
> -static int panel_lvds_disable(struct drm_panel *panel)
> -{
> - struct panel_lvds *lvds = to_panel_lvds(panel);
> -
> - if (lvds->backlight) {
> - lvds->backlight->props.power = FB_BLANK_POWERDOWN;
> - lvds->backlight->props.state |= BL_CORE_FBBLANK;
> - backlight_update_status(lvds->backlight);
> - }
> -
> - return 0;
> -}
> -
> static int panel_lvds_unprepare(struct drm_panel *panel)
> {
> struct panel_lvds *lvds = to_panel_lvds(panel);
> @@ -93,19 +78,6 @@ static int panel_lvds_prepare(struct drm_panel *panel)
> return 0;
> }
>
> -static int panel_lvds_enable(struct drm_panel *panel)
> -{
> - struct panel_lvds *lvds = to_panel_lvds(panel);
> -
> - if (lvds->backlight) {
> - lvds->backlight->props.state &= ~BL_CORE_FBBLANK;
> - lvds->backlight->props.power = FB_BLANK_UNBLANK;
> - backlight_update_status(lvds->backlight);
> - }
> -
> - return 0;
> -}
> -
> static int panel_lvds_get_modes(struct drm_panel *panel,
> struct drm_connector *connector)
> {
> @@ -132,10 +104,8 @@ static int panel_lvds_get_modes(struct drm_panel *panel,
> }
>
> static const struct drm_panel_funcs panel_lvds_funcs = {
> - .disable = panel_lvds_disable,
> .unprepare = panel_lvds_unprepare,
> .prepare = panel_lvds_prepare,
> - .enable = panel_lvds_enable,
> .get_modes = panel_lvds_get_modes,
> };
>
> @@ -242,10 +212,6 @@ static int panel_lvds_probe(struct platform_device *pdev)
> return ret;
> }
>
> - lvds->backlight = devm_of_find_backlight(lvds->dev);
> - if (IS_ERR(lvds->backlight))
> - return PTR_ERR(lvds->backlight);
> -
> /*
> * TODO: Handle all power supplies specified in the DT node in a generic
> * way for panels that don't care about power supply ordering. LVDS
> @@ -257,6 +223,10 @@ static int panel_lvds_probe(struct platform_device *pdev)
> drm_panel_init(&lvds->panel, lvds->dev, &panel_lvds_funcs,
> DRM_MODE_CONNECTOR_LVDS);
>
> + ret = drm_panel_of_backlight(&lvds->panel);
> + if (ret)
> + return ret;
> +
> ret = drm_panel_add(&lvds->panel);
> if (ret < 0)
> return ret;
> @@ -271,7 +241,7 @@ static int panel_lvds_remove(struct platform_device *pdev)
>
> drm_panel_remove(&lvds->panel);
>
> - panel_lvds_disable(&lvds->panel);
> + drm_panel_disable(&lvds->panel);
>
> return 0;
> }
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
