Describe the SW42902 touchscreen on GENI I2C13 with its interrupt,
reset, regulator supplies, pinctrl, and native 1080x2460 touch area.

Signed-off-by: Abdur Rofik <[email protected]>
---
 arch/arm64/boot/dts/qcom/sm8250-lg-timelm.dts | 48 +++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8250-lg-timelm.dts 
b/arch/arm64/boot/dts/qcom/sm8250-lg-timelm.dts
index 59d6c1518a469..160b6f4c98b17 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-lg-timelm.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-lg-timelm.dts
@@ -107,6 +107,24 @@ vph_pwr: vph-pwr-regulator {
                regulator-always-on;
                regulator-boot-on;
        };
+
+       reg_ts_vcl: regulator-ts-vcl {
+               compatible = "regulator-fixed";
+               regulator-name = "reg_ts_vcl";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               gpio = <&pm8150_gpios 8 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+
+       reg_ts_vdd: regulator-ts-vdd {
+               compatible = "regulator-fixed";
+               regulator-name = "reg_ts_vdd";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <1800000>;
+               gpio = <&pm8150_gpios 9 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
 };
 
 &apps_rsc {
@@ -461,6 +479,29 @@ &gpu_zap_shader {
        firmware-name = "qcom/sm8250/LG/timelm/a650_zap.mbn";
 };
 
+&i2c13 {
+       status = "okay";
+       clock-frequency = <400000>;
+
+       touchscreen@48 {
+               compatible = "lg,sw42902";
+               reg = <0x48>;
+
+               interrupt-parent = <&tlmm>;
+               interrupts = <39 IRQ_TYPE_LEVEL_LOW>;
+
+               pinctrl-names = "default";
+               pinctrl-0 = <&ts_int_default>;
+
+               reset-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+               vcl-supply = <&reg_ts_vcl>;
+               vdd-supply = <&reg_ts_vdd>;
+
+               touchscreen-size-x = <1080>;
+               touchscreen-size-y = <2460>;
+       };
+};
+
 &mdss {
        status = "okay";
 };
@@ -580,6 +621,13 @@ sdc2_card_det_n: sd-card-det-n-state {
                drive-strength = <2>;
                bias-pull-up;
        };
+
+       ts_int_default: ts-int-default-state {
+               pins = "gpio39";
+               function = "gpio";
+               drive-strength = <8>;
+               bias-pull-up;
+       };
 };
 
 &uart12 {
-- 
2.39.5

Reply via email to