Enable the PM8150B Type-C controller in sink mode with PDO_VAR up to 9V/3A, and connect the OF graph endpoints for USB DWC3 and SuperSpeed QMP PHY orientation switching.
Signed-off-by: Abdur Rofik <[email protected]> --- arch/arm64/boot/dts/qcom/sm8250-lg-timelm.dts | 47 +++++++++++++++++++ 1 file changed, 47 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8250-lg-timelm.dts b/arch/arm64/boot/dts/qcom/sm8250-lg-timelm.dts index 160b6f4c98b17..3ce8161574a95 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-lg-timelm.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-lg-timelm.dts @@ -9,6 +9,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/usb/pd.h> #include "sm8250.dtsi" #include "pm8150.dtsi" #include "pm8150b.dtsi" @@ -556,6 +557,44 @@ volume_down_state: volume-down-state { }; }; +&pm8150b_typec { + status = "okay"; + + vdd-pdphy-supply = <&vreg_l2a_3p1>; + + connector { + compatible = "usb-c-connector"; + + power-role = "sink"; + data-role = "device"; + self-powered; + + op-sink-microwatt = <15000000>; + sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM) + PDO_VAR(5000, 9000, 3000)>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pm8150b_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs_out>; + }; + }; + + port@1 { + reg = <1>; + + pm8150b_typec_mux: endpoint { + remote-endpoint = <&usb_1_qmpphy_out>; + }; + }; + }; + }; +}; &pon_pwrkey { status = "okay"; }; @@ -660,6 +699,10 @@ &usb_1_dwc3 { dr_mode = "peripheral"; }; +&usb_1_dwc3_hs_out { + remote-endpoint = <&pm8150b_hs_in>; +}; + &usb_1_hsphy { status = "okay"; @@ -674,3 +717,7 @@ &usb_1_qmpphy { vdda-phy-supply = <&vreg_l18a_0p9>; vdda-pll-supply = <&vreg_l9a_1p2>; }; + +&usb_1_qmpphy_out { + remote-endpoint = <&pm8150b_typec_mux>; +}; -- 2.39.5
