On Tuesday 19 February 2002 14:48, Michael Thaler wrote:
> On Tue, Feb 19, 2002 at 02:00:54PM +0100, R. Reucher wrote:
>
> Thank you very much! Now I get:
>
> mthaler:~# lsmod
> Module Size Used by Not tainted
> mach64 71544 1
>
> but glxinfo still shows:
>
> mthaler:~# glxinfo
> name of display: :0.0
> display: :0 screen: 0
> direct rendering: No
Then it's still not working correctly ! Please look at your XFree86.0.log
again and search for "direct rendering" !!!
> which is really strange because quake3 runs perfect, it even runs with
> 1024x768, not good but I guess without DRI this would not work at
> all. In 640x480 it is really quite good considering the driver is not
> using agp or dma.
Hmmm, this might just be caused by the less color bits you're using now...
> glxgears gives me:
> mthaler:~# glxgears
> 710 frames in 5.0 seconds = 142.000 FPS
> 700 frames in 5.0 seconds = 140.000 FPS
> 800 frames in 5.0 seconds = 160.000 FPS
Not sure, but I'd say that's not fast enough. But then again, I don't have a
Mach64...
> thanks a lot!
NP, but I suspect there's still a problem left... check the log !
Rene
--
R. Reucher voice: +49/621/4803-174
COMPAREX GmbH, VL40 fax: +49/621/4803-141
Mannheimerstr. 105 e-mail: [EMAIL PROTECTED]
D-68535 Edingen-Neckarhausen
It is not enough to succeed. Others must fail.
-- Gore Vidal
_______________________________________________
Dri-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/dri-devel
