Sophia Li - Sun Microsystems - Beijing China a ?crit : > G?rard Henry: >> is it ok to add: >> sd-config-list = "USB2.0 (HS) FLASH DISK", "usb_with_nvcache"; >> usb_with_nvcache=1,0x40000,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1; >> > I think this would be fine. > > but it doesn't work, even after rebooting, the peripheral isn't visible. here are logs: Dec 26 13:12:38 yakari usba: [ID 912658 kern.info] USB 2.0 device (usb10d6,1101) operating at hi speed (USB 2.x) on USB 2.0 root hub: storage at 4, scsa2usb0 at bus address 2 Dec 26 13:12:38 yakari usba: [ID 349649 kern.info] USB 2.0(HS) Flash Disk A00000600001 Dec 26 13:12:38 yakari genunix: [ID 936769 kern.info] scsa2usb0 is /pci at 0,0/pci1028,139 at 1d,7/storage at 4 Dec 26 13:12:38 yakari genunix: [ID 408114 kern.info] /pci at 0,0/pci1028,139 at 1d,7/storage at 4 (scsa2usb0) online Dec 26 13:12:38 yakari scsi: [ID 193665 kern.info] sd0 at scsa2usb0: target 0 lun 0 Dec 26 13:12:38 yakari genunix: [ID 936769 kern.info] sd0 is /pci at 0,0/pci1028,139 at 1d,7/storage at 4/disk at 0,0 Dec 26 13:12:38 yakari genunix: [ID 408114 kern.info] /pci at 0,0/pci1028,139 at 1d,7/storage at 4/disk at 0,0 (sd0) online Dec 26 13:12:38 yakari genunix: [ID 314293 kern.info] device pciclass,030000 at 2(display#0) keeps up device sd at 0,0(disk#0), but the latter is not power managed
and attached is the result of "echo "::usba_debug_buf" | mdb -k >/tmp/usba_buf" thanks for help, gerard -- Gerard HENRY -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: usba_buf URL: <http://mail.opensolaris.org/pipermail/driver-usb/attachments/20071226/e4f5b677/attachment.ksh>
