On Sat,  3 Mar 2018 20:49:33 -0500
Brian Masney <masn...@onstation.org> wrote:

> There were three places where the same chunk of code was used to read
> the chip status. This patch creates a common function
> tsl2x7x_read_status() to reduce duplicate code. This patch also corrects
> tsl2x7x_event_handler() to properly check for an error after reading the
> chip status.
> 
> Signed-off-by: Brian Masney <masn...@onstation.org>
Applied.
> ---
>  drivers/staging/iio/light/tsl2x7x.c | 40 
> ++++++++++++++++++++++---------------
>  1 file changed, 24 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/staging/iio/light/tsl2x7x.c 
> b/drivers/staging/iio/light/tsl2x7x.c
> index c02db03ef369..6bb622816660 100644
> --- a/drivers/staging/iio/light/tsl2x7x.c
> +++ b/drivers/staging/iio/light/tsl2x7x.c
> @@ -293,6 +293,20 @@ static int tsl2x7x_clear_interrupts(struct tsl2X7X_chip 
> *chip, int reg)
>       return ret;
>  }
>  
> +static int tsl2x7x_read_status(struct tsl2X7X_chip *chip)
> +{
> +     int ret;
> +
> +     ret = i2c_smbus_read_byte_data(chip->client,
> +                                    TSL2X7X_CMD_REG | TSL2X7X_STATUS);
> +     if (ret < 0)
> +             dev_err(&chip->client->dev,
> +                     "%s: failed to read STATUS register: %d\n", __func__,
> +                     ret);
> +
> +     return ret;
> +}
> +
>  /**
>   * tsl2x7x_get_lux() - Reads and calculates current lux value.
>   * @indio_dev:       pointer to IIO device
> @@ -332,13 +346,10 @@ static int tsl2x7x_get_lux(struct iio_dev *indio_dev)
>               goto out_unlock;
>       }
>  
> -     ret = i2c_smbus_read_byte_data(chip->client,
> -                                    TSL2X7X_CMD_REG | TSL2X7X_STATUS);
> -     if (ret < 0) {
> -             dev_err(&chip->client->dev,
> -                     "%s: Failed to read STATUS Reg\n", __func__);
> +     ret = tsl2x7x_read_status(chip);
> +     if (ret < 0)
>               goto out_unlock;
> -     }
> +
>       /* is data new & valid */
>       if (!(ret & TSL2X7X_STA_ADC_VALID)) {
>               dev_err(&chip->client->dev,
> @@ -458,12 +469,9 @@ static int tsl2x7x_get_prox(struct iio_dev *indio_dev)
>               return -EBUSY;
>       }
>  
> -     ret = i2c_smbus_read_byte_data(chip->client,
> -                                    TSL2X7X_CMD_REG | TSL2X7X_STATUS);
> -     if (ret < 0) {
> -             dev_err(&chip->client->dev, "i2c err=%d\n", ret);
> +     ret = tsl2x7x_read_status(chip);
> +     if (ret < 0)
>               goto prox_poll_err;
> -     }
>  
>       switch (chip->id) {
>       case tsl2571:
> @@ -1396,13 +1404,13 @@ static irqreturn_t tsl2x7x_event_handler(int irq, 
> void *private)
>       struct tsl2X7X_chip *chip = iio_priv(indio_dev);
>       s64 timestamp = iio_get_time_ns(indio_dev);
>       int ret;
> -     u8 value;
>  
> -     value = i2c_smbus_read_byte_data(chip->client,
> -                                      TSL2X7X_CMD_REG | TSL2X7X_STATUS);
> +     ret = tsl2x7x_read_status(chip);
> +     if (ret < 0)
> +             return ret;
>  
>       /* What type of interrupt do we need to process */
> -     if (value & TSL2X7X_STA_PRX_INTR) {
> +     if (ret & TSL2X7X_STA_PRX_INTR) {
>               tsl2x7x_get_prox(indio_dev); /* freshen data for ABI */
>               iio_push_event(indio_dev,
>                              IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY,
> @@ -1412,7 +1420,7 @@ static irqreturn_t tsl2x7x_event_handler(int irq, void 
> *private)
>                                                   timestamp);
>       }
>  
> -     if (value & TSL2X7X_STA_ALS_INTR) {
> +     if (ret & TSL2X7X_STA_ALS_INTR) {
>               tsl2x7x_get_lux(indio_dev); /* freshen data for ABI */
>               iio_push_event(indio_dev,
>                              IIO_UNMOD_EVENT_CODE(IIO_LIGHT,

_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Reply via email to