Hi Eric, One more thought which I forgot to mention in my last reply was maybe you could try with the source release? Is this a new installation or an existing populated repository?
Cheers Gary Gary Browne Development Programmer Library IT Services University of Sydney ph: 9351-5946 > -----Original Message----- > From: Kurzenberger, Eric [mailto:[email protected]] > Sent: Thursday, 26 March 2009 6:53 AM > To: Gary Browne; [email protected] > Subject: Re: [Dspace-tech] Changes to Messages.properties not > being recognized > > Hi Gary, > > I already had the Messages.properties file in > [dspace-source]/dspace/modules/jspui/src/main/resources/ > prior to building and deploying, following the instructions > in the Dspace wiki (which Van Ly also sent in response to > this thread). No luck. Could this be because I'm using the > default release and not the source release? I can't for the > life of me figure out why the dspace install would be > ignoring the Messages.properties file. > > Cheers, > > Eric > > On 3/24/09 11:08 PM, "Gary Browne" > <[email protected]> wrote: > > Hi Eric, > > Upon further investigation, the path to your source > Messages.properties appears to be incorrect. I have: > > [dspace-source]/dspace/modules/jspui/src/main/resources/Messag > es.propert > ies > > Try sticking your Messages.properties file in that location > and going through the build and deploy steps again. > > The 'failure to delete' error looks like a permissions > problem. Make sure all your source files are owned by the > 'dspace' user (or whatever you choose to call the user which > runs tomcat). > > Good luck. > Cheers > Gary > > > Gary Browne > Development Programmer > Library IT Services > University of Sydney > ph: 9351-5946 > > > > -----Original Message----- > > From: Kurzenberger, Eric [mailto:[email protected]] > > Sent: Wednesday, 25 March 2009 2:00 PM > > To: Gary Browne; [email protected] > > Subject: Re: [Dspace-tech] Changes to Messages.properties not being > > recognized > > > > Thanks for the response, Gary. I followed the steps you > outlined, but > > still am not seeing my changes reflected. > > Messages.properties did not get copied to the > > [dspace-install-directory]/webapps/jspui/WEB-INF/classes/ > > directory (which is empty) after running both "ant > init_configs" and > > "ant update." I copied it manually and restarted tomcat, but still > > didn't see my changes reflected. > > I also tried copying Messages.properties to > > [dspace-install-directory]/config, but that didn't work either. > > > > I did get the following build error when running "mvn clean > package:" > > > > Failed to delete directory: > > /usr/local/dspace-1.5.1-release/dspace/modules/xmlui/target. > > Reason: Unable to delete file > > /usr/local/dspace-1.5.1-release/dspace/modules/xmlui/target/xm > > lui-1.5.1/WEB-INF/lib/activation-1.1.jar > > > > But the build was successful, and since I'm using jspui, > not xmlui, I > > don't see why this would be an issue. > > > > Do you have any other suggestions? > > > > Cheers, > > > > Eric > > > > > > On 3/23/09 6:38 PM, "Gary Browne" > > <[email protected]> wrote: > > > > Hi Eric, > > > > Looks like noone has replied to you AFAICS. Let's see how we go... > > > > I don't copy the war files, just point tomcat to the > > [dspace-install-directory]/webapps/jspui directory (in > server.xml), so > > not sure if this will work with your setup. > > > > So it looks like you have the Messages.properties file in the right > > location (I think, from memory) in the source directory. > Then you need > > to run from the [dspace-source]/dspace directory: > > > > mvn clean package > > > > Then change to your dspace-1.5.1-build.dir directory (cd > > target/dspace-1.5.1-build.dir) and run: > > > > ant init_configs (or maybe 'ant update', if that doesn't work > > - sorry, just back from 3 months off and a bit rusty). > > > > How can you check if it has worked? Check the > > [dspace-install-directory]/webapps/jspui/WEB-INF/classes/ > > directory for your (updated) Messages.properties file. It should be > > copied here. Then of course, check your button. > > > > Hope this is of help in some small way. > > > > Kind regards > > Gary > > > > > > Gary Browne > > Development Programmer > > Library IT Services > > University of Sydney > > ph: 9351-5946 > > > > > > > -----Original Message----- > > > From: Kurzenberger, Eric [mailto:[email protected]] > > > Sent: Saturday, 21 March 2009 2:36 AM > > > To: [email protected] > > > Subject: [Dspace-tech] Changes to Messages.properties not being > > > recognized > > > > > > Hi all, > > > > > > I made a couple changes to my Messages.properties file (to > > take care > > > of the ???jsp.mydspace.request.export.community.??? > > > button issue, amongst other things) and did a rebuild of > > DSpace, but > > > my changes aren't being recognized. Since I'm using the default > > > release of 1.5.1 and not the source release, I had to get the > > > Messages.properties file from the DSpace SourceForge > repository and > > > copy it to [Dspace-source]/modules/jspui/main/resources, > which I've > > > read worked for other users, then did a rebuild of DSpace and > > > restarted Tomcat. But the changes I made aren't showing up > > when I go > > > back into DSpace. > > > > > > One note: the rebuild instructions on the wiki indicate > to copy the > > > .war files from the build directory in [dspace-source] to > [tomcat], > > > but I don't see a build directory anywhere in my > > [dspace-source]. I > > > do have a "dspace-1.5.1-build.dir" directory, but hat > > doesn't contain > > > any .war files. Could this be the source of the issue? > > > > > > Thanks for all your help! > > > > > > Cheers, > > > > > > Eric > > > > > > > > > -------------------------------------------------------------- > > > ---------------- > > > Apps built with the Adobe(R) Flex(R) framework and Flex > > > Builder(TM) are powering Web 2.0 with engaging, cross-platform > > > capabilities. Quickly and easily build your RIAs with > Flex Builder, > > > the Eclipse(TM)based development software that enables > intelligent > > > coding and step-through debugging. > > > Download the free 60 day trial. > > > http://p.sf.net/sfu/www-adobe-com > > > _______________________________________________ > > > DSpace-tech mailing list > > > [email protected] > > > https://lists.sourceforge.net/lists/listinfo/dspace-tech > > > > > > > -------------------------------------------------------------- > > ---------------- > > Apps built with the Adobe(R) Flex(R) framework and Flex > > Builder(TM) are powering Web 2.0 with engaging, cross-platform > > capabilities. Quickly and easily build your RIAs with Flex Builder, > > the Eclipse(TM)based development software that enables intelligent > > coding and step-through debugging. > > Download the free 60 day trial. > > http://p.sf.net/sfu/www-adobe-com > > _______________________________________________ > > DSpace-tech mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/dspace-tech > > > > > > -------------------------------------------------------------- > ---------------- > Apps built with the Adobe(R) Flex(R) framework and Flex > Builder(TM) are powering Web 2.0 with engaging, > cross-platform capabilities. Quickly and easily build your > RIAs with Flex Builder, the Eclipse(TM)based development > software that enables intelligent coding and step-through debugging. > Download the free 60 day trial. > http://p.sf.net/sfu/www-adobe-com > _______________________________________________ > DSpace-tech mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/dspace-tech > > ------------------------------------------------------------------------------ _______________________________________________ DSpace-tech mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/dspace-tech
