I found that this was the problem: http://www.mail-archive.com/[email protected]/msg10873.html
-----Original Message----- From: Blanco, Jose [mailto:[email protected]] Sent: Friday, March 25, 2011 3:01 PM To: dspace-tech Subject: [Dspace-tech] performace question Recently I wrote a script that inserted about 4000 epeople in the eperson table, and then made these epeople depositors in the a variety of tables by inserting the appropriate records in the epersongroup2eperso table. It all appears to work just fine, but we are noticing that when in the admin page of a collection and requesting to access the Depositors page ( or any of the pages that are accessible from the collection admin page ), the system takes a bit of time to open up that page. I'm wondering if this is because I did not run index-init after changing these tables. Any ideas? Thank you! Jose ------------------------------------------------------------------------------ Enable your software for Intel(R) Active Management Technology to meet the growing manageability and security demands of your customers. Businesses are taking advantage of Intel(R) vPro (TM) technology - will your software be a part of the solution? Download the Intel(R) Manageability Checker today! http://p.sf.net/sfu/intel-dev2devmar _______________________________________________ DSpace-tech mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/dspace-tech ------------------------------------------------------------------------------ Enable your software for Intel(R) Active Management Technology to meet the growing manageability and security demands of your customers. Businesses are taking advantage of Intel(R) vPro (TM) technology - will your software be a part of the solution? Download the Intel(R) Manageability Checker today! http://p.sf.net/sfu/intel-dev2devmar _______________________________________________ DSpace-tech mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/dspace-tech
