Check with Scott N1VG at Argent Data Systems. He sells the FC301 with APRS built in, where the APRS board can be used to change radio frequencies. He'll be able to tell you.
www.n1vg.net James VE6SRV On 7/25/09, Marco Di Martino (IW2OHX) <[email protected]> wrote: > Good morning, > > I recently bought a FC-301/D to use it for D-star home brew projects.. > > Yesterday night I spent it "playing" with FC-301/D ;-) > I built cable modem to interface FC-301/D with my packet modem. I tested > it at 400.125Mhz and It goes > in TX as it must do. > > I have problems in programming the radio. > I didn't find a way to successfully read them via RS232. > > Someone has got experience with FC-301/D ? > > Please can you help me... > > 1) what are default value for RS232 ? 9600,8,N,1 ? or what else? > > 2) yellow line must be grounded to go in programming mode ? > Is it correct that when the radio is in programming mode a red led on > the right is fixed ? > How can I ground yellow line ? Attacch it to an external ground ? on > ground it on DB9 soldering > it to PIN 4 ? > > Thanks > MArco > > -- > --- > Marco Di Martino > Via Attimo, 18 - Bollate (MI) > Mobile: +393285373364 > e-mail: [email protected] > - > Amateur Radio: I W 2 O H X > Homepage Inet: www.iw2ohx.net > Homepage Ampr: iw2ohx.ampr.org > LinuxNode: telnet://iw2ohx.ampr.org/ > (X)net: telnet://iw2ohx-2.ampr.org/ > Packet Mail : IW2OHX @ IW2OHX.ILOM.ITA.EU > Ampr Mail: [email protected] > --- > > > > ------------------------------------ > > Please TRIM your replies or set your email program not to include the > original message in reply unless needed for clarity. ThanksYahoo! Groups > Links > > > >
