Also the Tracker 2 yahoo group has lots f this information you may want to try 
that also I use one of the units mentioned below it has the built in TNC asnd 
comes in UHF or VHF models a really wonderful radio. 

In [email protected], James Ewen <ve6...@...> wrote:
>
> Check with Scott N1VG at Argent Data Systems. He sells the FC301 with
> APRS built in, where the APRS board can be used to change radio
> frequencies. He'll be able to tell you.
> 
> www.n1vg.net
> 
> James
> VE6SRV
> 
> 
> On 7/25/09, Marco Di Martino (IW2OHX) <iw2...@...> wrote:
> > Good morning,
> >
> > I recently bought a FC-301/D to use it for D-star home brew projects..
> >
> > Yesterday night I spent it "playing" with FC-301/D ;-)
> > I built cable modem to interface FC-301/D with my packet modem. I tested
> > it at 400.125Mhz and It goes
> > in TX as it must do.
> >
> > I have problems in programming the radio.
> > I didn't find a way to successfully read them via RS232.
> >
> > Someone has got experience with FC-301/D ?
> >
> > Please can you help me...
> >
> > 1) what are default value for RS232 ? 9600,8,N,1 ? or what else?
> >
> > 2) yellow line must be grounded to go in programming mode ?
> > Is it correct that when the radio is in programming mode a red led on
> > the right is fixed ?
> > How can I ground yellow line ? Attacch it to an external ground ? on
> > ground it on DB9 soldering
> > it to PIN 4 ?
> >
> > Thanks
> > MArco
> >
> > --
> > ---
> > Marco Di Martino
> > Via Attimo, 18 - Bollate (MI)
> > Mobile: +393285373364
> > e-mail: iw2...@...
> > -
> > Amateur Radio: I W 2 O H X
> > Homepage Inet: www.iw2ohx.net
> > Homepage Ampr: iw2ohx.ampr.org
> > LinuxNode: telnet://iw2ohx.ampr.org/
> > (X)net: telnet://iw2ohx-2.ampr.org/
> > Packet Mail : IW2OHX @ IW2OHX.ILOM.ITA.EU
> > Ampr Mail: iw2...@...
> > ---
> >
> >
> >
> > ------------------------------------
> >
> > Please TRIM your replies or set your email program not to include the
> > original  message in reply unless needed for clarity.  ThanksYahoo! Groups
> > Links
> >
> >
> >
> >
>


Reply via email to