Mike,
There are several of in the Seattle area that can help you with setup
if you run into problems, the key is to follow the instructions
exactly as outlined at http://dsyncg2.dstarusers.org/JoiningTheNetwork2.pdf
(don't second guess it).
On Aug 28, 2009, at 1:00 PM, ipscone wrote:
There is really a lot of good information in this thread. It's going
to help me a lot.
I think I might be going the less-preferred route in setting one of
these up. Being not so patient :-), I'd like to get something up and
running as soon as possible and then tweak it to a better system.
Therefore, I will probably just get these at first.
1) ID-PR2C - The controller
2) ID-RP4000V - Voice Module
3) A duplexer (yet to be decided; suggestions)
4) Gateway server (with software)
I will use my existing antenna, even though it might not be the best
one for this purpose. But I have it already. And if I'm going to buy
a new antenna I would probably have to have different mast structure
and such and that's something I can improve later.
That should give me the essential part of the system and allow me to
check out the interconnectivity, software and a gateway. I'm a bit
concerned about setting up the gateway computer. I'm thinking that
might be my technically most difficult task.
Mike
John D. Hays
Amateur Radio Station K7VE
PO Box 1223
Edmonds, WA 98020-1223 VOIP/SIP: [email protected]
Email: [email protected]
