Sentence formatter setting q Enter GPS-TX in GPS mode. ?MENU ? GPS ? GPS-TX (Push [MENU ]), (rotate [DIAL], then push [ ](MONI).) GPS-TX screen is displayed. w Rotate [DIAL] to select DVG. e Push [ ](MONI) to select GPS sentence screen. r Rotate [DIAL] to select the desired GPS sentence(use GGA &RMC), then push [ ](MONI). A total of 6 sentences, RMC, GGA, GLL, GSA, VTG and GSV are available. t Rotate [DIAL] to select to turn the sentence usage ON or OFF. y Push [ ](MONI) to return to GPS sentence screen. u Repeat the steps r to y to set another GPS sentence usage. Up to 4 GPS sentences are usable at the same time. i Push [MENU ] to return to frequency indication
GPS message programming q Enter TX GPS in MESSAG screen. ?MENU ? MESSAG ? TX GPS (Push [MENU ]), (rotate [DIAL], then push [ ](MONI).) TX GPS screen is displayed. w Push [ ](MONI) to select the message edit condition. Use http://www.aprs-is.net/DPRSCalc.aspx to determine message The 1st digit of the message blinks. e Rotate [DIAL] to select the desired character or symbol. r Push [](LOW) to select 2nd digit, then rotate [DIAL] to select the desired character or code. Push [](LOW) to move the cursor right; push [](CS) to move the cursor left. 2nd digit blinks (1st digit stops blinking). t Repeat step r to enter the desired message. Up to 20-character messages can be set. y Push [ ](MONI) to store the message. u Push [MENU ] to return to frequency indication GPS message automatic transmission q Enter GPS.ATX in GPS mode. ?MENU ? GPS ? GPS.ATX (p. 141) (Push [MENU ]), (rotate [DIAL], then push [ ](MONI).) GPS AUTO TX screen is displayed. w Rotate [DIAL] to select the desired position data transmitting interval from 5 sec., 10 sec., 30 sec., 1 min., 3 min., 5 min., 10 min., 30 min. or OFF. The GPS message is also transmitted if programmed. e Push [ ](MONI) to return to GPS mode. r Push [MENU ] to return to frequency indication. NOTE: Your own call sign (MY) must be set to activate the GPS automatic transmission. [NOTICE] 5SEC cannot be selected when 4 GPS sentences are selected. Only use GPS message automatic transmission in simplex mode. Automatic GPS message transmission through a repeater may interfere with other communications. vk4tux
