Hi Adrian, Thank you for the information! I now have the GPS setup to show on the radios and on JFINDU / APRS.fi.
Thanks so much for your help below! 73 and hope to talk to you again soon, Robert - N4IJS --- In [email protected], Adrian <vk4...@...> wrote: > > Sentence formatter setting > q Enter "GPS-TX" in GPS mode. > ?MENU ? GPS ? GPS-TX > (Push [MENU ]), (rotate [DIAL], then push [ ](MONI).) > GPS-TX screen is displayed. > w Rotate [DIAL] to select "DVG." > e Push [ ](MONI) to select GPS sentence screen. > r Rotate [DIAL] to select the desired GPS sentence(use GGA &RMC), then > push [ ](MONI). > A total of 6 sentences, RMC, GGA, GLL, GSA, VTG and GSV > are available. > t Rotate [DIAL] to select to turn the sentence usage ON or > OFF. > y Push [ ](MONI) to return to GPS sentence screen. > u Repeat the steps r to y to set another GPS sentence > usage. > Up to 4 GPS sentences are usable at the same time. > i Push [MENU ] to return to frequency indication > > > GPS message programming > q Enter "TX GPS" in MESSAG screen. > ?MENU ? MESSAG ? TX GPS > (Push [MENU ]), (rotate [DIAL], then push [ ](MONI).) > TX GPS screen is displayed. > w Push [ ](MONI) to select the message edit condition. > > Use http://www.aprs-is.net/DPRSCalc.aspx to determine message > > The 1st digit of the message blinks. > e Rotate [DIAL] to select the desired character or symbol. > r Push [](LOW) to select 2nd digit, then rotate [DIAL] to > select the desired character or code. > Push [](LOW) to move the cursor right; push [](CS) to move > the cursor left. > 2nd digit blinks (1st digit stops blinking). > t Repeat step r to enter the desired message. > Up to 20-character messages can be set. > y Push [ ](MONI) to store the message. > u Push [MENU ] to return to frequency indication > > > GPS message automatic transmission > q Enter "GPS.ATX" in GPS mode. > ?MENU ? GPS ? GPS.ATX (p. 141) > (Push [MENU ]), (rotate [DIAL], then push [ ](MONI).) > GPS AUTO TX screen is displayed. > w Rotate [DIAL] to select the desired position data transmitting > interval from 5 sec., 10 sec., 30 sec., 1 min., 3 min., 5 > min., 10 min., 30 min. or OFF. > The GPS message is also transmitted if programmed. > e Push [ ](MONI) to return to GPS mode. > r Push [MENU ] to return to frequency indication. > NOTE: Your own call sign ("MY") must be set to activate > the GPS automatic transmission. > [NOTICE] > "5SEC" cannot be selected when 4 GPS sentences are selected. > Only use GPS message automatic transmission in simplex > mode. > Automatic GPS message transmission through a repeater > may interfere with other communications. > > vk4tux >
