Yes, I tried entering the programming using the memory channel list alone. That will not work (for me at least). The only way you can enter information into the cells of the memory location is by having the information in the repeater list first. If nothing is in the repeater list, then you cannot select anything to put into a cell. In other words, there does not seem to be an ability for free form entry into the memory cells.
Duffy www.wb8nut.com --- In [email protected], "Woodrick, Ed" <ewoodr...@...> wrote: > > I suspect that you might be trying to put the programming under the Repeater > List. Use the basic Memory CH list. Make sure that you scroll to the far > right of the screen for the Tour, RPT1 and RPT2 Call sign fields. > > The Repeater List, while it works, is a little odd in the way that it works. > There's a few tricks about it. > > If you stay in the regular memory mode, things should work relatively > straight forward. >
