Hi Alex,
I think what you are looking for (2D radial symmetric problem) is not
implemented anywhere. It would require to set different "extrusion factors"
for x-faces, y-faces and volumes. You would have to implement these
scalings manually at the right places.
Cheers,
Timo
On 05.04.2017 15:43, Martin Beck wrote:
Hi Alex,
The cakegridcreator.hh file is located in dumux-stable in the
/dumux/io subfolder.
In addition, the test/io/gridcreator/ folder contains a test together
with an input file. Running this simple test will create a .vtu file,
which you can then display with Paraview.
Cheers,
Martin
On 04/05/2017 03:26 PM, Tatomir, Alexandru wrote:
Hi Martin,
Thanks for the answer. Please be more specific.
Where are these files located?
Best wishes,
Alex
*From:*Martin Beck [mailto:[email protected]]
*Sent:* Wednesday, April 5, 2017 3:02 PM
*To:* Tatomir, Alexandru <[email protected]>
*Cc:* [email protected]
*Subject:* Re: [DuMuX] 2D radial
Hi Alex,
the piece of cake code allows you to create a grid with zero height
by specifying the minimal and maximal value in the axial direction as
zero. But you will still get a grid with a third dimension (all
zeroes), which requires you to specify boundary conditions in the
third dimension.
Alternatively, you could alter the cakegridcreator.hh file and get
rid of the routines which are responsible for the extrusion of the
piece of cake in the third dimension.
Cheers,
Martin
On 04/05/2017 02:15 PM, Tatomir, Alexandru wrote:
Hello,
Is there in Dumux a 2D radial problem (in a vertical
cross-section)? So that it does not require running the full 3D
or “piece of cake”.
Best wishes,
Alex
_______________________________________________
Dumux mailing list
[email protected]
<mailto:[email protected]>
https://listserv.uni-stuttgart.de/mailman/listinfo/dumux
--
*******************************************************
Martin Beck
Institute for Modelling Hydraulic and Environmental Systems
Department of Hydromechanics and Modelling of Hydrosystems
Pfaffenwaldring 61
D-70569 Stuttgart
Tel.: (+49) 711/ 685-64899
[email protected]
<mailto:[email protected]>
*******************************************************
--
*******************************************************
Martin Beck
Institute for Modelling Hydraulic and Environmental Systems
Department of Hydromechanics and Modelling of Hydrosystems
Pfaffenwaldring 61
D-70569 Stuttgart
Tel.: (+49) 711/ 685-64899
[email protected]
*******************************************************
_______________________________________________
Dumux mailing list
[email protected]
https://listserv.uni-stuttgart.de/mailman/listinfo/dumux
--
____________________________________________________________________
Timo Koch phone: +49 711 685 64676
IWS, Universität Stuttgart fax: +49 711 685 60430
Pfaffenwaldring 61 email: [email protected]
D-70569 Stuttgart url: www.hydrosys.uni-stuttgart.de
____________________________________________________________________
_______________________________________________
Dumux mailing list
[email protected]
https://listserv.uni-stuttgart.de/mailman/listinfo/dumux
