on Paul Miller <[EMAIL PROTECTED]> wrote:
> The cord must have gotten pinched. I
> temporarily spliced and soldered the cord tonight. I
> tried it and it works. I also not notice that I get
> the RED X OVER THE BATTERY ICON! I plug the battery
> into the computer and notice the charge-level
> indicator flash briefly in the controlbar but then
> disappear (the plug icon remains). The X also remains
> on the battry icon. Is it another pc board in the
> computer??
Try this:
--Reset Power Manager
--Check battery contacts and look for small spring in upper left with
battery removed.
--Push battery in firmly and hold for a minute to see if charging starts.
--Remove and reinsert battery several times and repeat. (Sometimes the
battery memory needs to e jogged, especially after a deep discharge and
sitting for some length of time.)
As for missing screws, as long as they are not rolling around and are not
your hinge screws, no problem. I've traveled with a 2400 with maybe 2/3 of
the screws out (intentionally for tech reasons, but not recommended), for
over a month with no ill effects.
---
Sidney Ho
----------
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml>
Be sure to visit Mac2400! <http://www.sineware.com/mac2400>
To unsubscribe, E-mail to: <[EMAIL PROTECTED]>
To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]>
Need help from a real person? Try. <[EMAIL PROTECTED]>
----------
Dr. Bott | 10/100 Ethernet for your 2400 is finally here!
MPC-100 | <http://www.drbott.com/prod/mpc100.html>
NineWire | If they are cool enough to host this list...
Digital Solutions | ...you should check them out! http://www.NineWire.com/
Midwest Mac Parts ][ <http://www.midwestmac.com>
After-market parts for Macs. ][ 888-356-1104 ][
MacResQ Specials: LaCie SCSI CDR From $99! PowerBook 3400/200 Only $879!
Norton AntiVirus 6 Only $19! We Stock PARTS! <http://www.macresq.com>
