Use TomeVeiwer to extract the Airport Card Extensions / Control Strip. Then put them in your Extensions Folder / Control Strip Folder Restart the 2400c with the Orinoco PC card in it. The card will show up as an Airport card. >From there you can coast the rest of the way home.
http://www.versiontracker.com/redir.fcgi/kind=1&db=&id=4561/tomeviewer-13d3.sit http://www.macupdate.com/download.php/AirPort_1.3.1.smi.bin?id=4614 http://www.Orinocowireless.com/template.html?section=m52&envelope=90&page=2941 >I am in the process of using an Apple airport base station with DSL to >connect my 2400 to the internet. > >I do not want the laptop in the same location as the DSL splitter. I would >rather just have the airport base station and modem with the splitter in one >location and have the 2400 at another location in the house. > >I'm using system 8.6 and will use an Orinoco PC card. The 2400 is not >cardbus enabled. And I cannot load the software that came with the base >station on the 2400. The message is that the software cannot be loaded on >this computer. I do have a copy of tomeviewer. > >My questions are these: > >Software Installation > >1. How do I load the software onto the 2400? > >2. If I use tomeviewer, how does it work? > >3. What files do I need? > >4. Will it work with 8.6 or do I need a more recent system that has airport >as part of the system? > > >Positioning of Hardware > >1. Will it work to just have the modem and base station connected to the >splitter and then have the Orinoco card in the 2400? or > >2. Will I need to have the ethernet card in the PCMCIA slot with the Orinoco >card and if so does the ethernet card have to be physically connected to the >base station? (note: the base station has ethernet} > >3. Can I make the necessary connections without a router? > >4. Does the 2400 need to be cardbus enabled? > >Any information will be helpful and if I can get it to work I will give the >setup on list. > >Barry > > > > > > > >---------- >Duo/2400 List, The friendliest place on the Net! >A listserv for users and fans of Mac subportables. >FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml> >Be sure to visit Mac2400! <http://www.sineware.com/mac2400> > >To unsubscribe, E-mail to: <[EMAIL PROTECTED]> >To switch to the DIGEST mode, E-mail to ><[EMAIL PROTECTED]> >Need help from a real person? Try. ><[EMAIL PROTECTED]> > >---------- >Dr. Bott | 10/100 Ethernet for your 2400 is finally here! >MPC-100 | <http://www.drbott.com/prod/mpc100.html> > >NineWire | If they are cool enough to host this list... >Digital Solutions | ...you should check them out! http://www.NineWire.com/ > >Midwest Mac Parts ][ <http://www.midwestmac.com> >After-market parts for Macs. ][ 888-356-1104 ][ > >MacResQ Specials: LaCie SCSI CDR From $99! PowerBook 3400/200 Only $879! >Norton AntiVirus 6 Only $19! We Stock PARTS! <http://www.macresq.com> ---------- Duo/2400 List, The friendliest place on the Net! A listserv for users and fans of Mac subportables. FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml> Be sure to visit Mac2400! <http://www.sineware.com/mac2400> To unsubscribe, E-mail to: <[EMAIL PROTECTED]> To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]> Need help from a real person? Try. <[EMAIL PROTECTED]> ---------- Dr. Bott | 10/100 Ethernet for your 2400 is finally here! MPC-100 | <http://www.drbott.com/prod/mpc100.html> NineWire | If they are cool enough to host this list... Digital Solutions | ...you should check them out! http://www.NineWire.com/ Midwest Mac Parts ][ <http://www.midwestmac.com> After-market parts for Macs. ][ 888-356-1104 ][ MacResQ Specials: LaCie SCSI CDR From $99! PowerBook 3400/200 Only $879! Norton AntiVirus 6 Only $19! We Stock PARTS! <http://www.macresq.com>
