" can't get the drive on the Duo to show up when I boot using the Speed Disk floppy. Just shows the floppy and there's no way in the program to force it to scan the SCSI. Can't defrag it without using the floppy as there are files open. Tried the emergency disk with the same result. Thought I might be able to boot with a system disk and then run Speed disk from the hard drive. So far, I'm not having any luck doing that. Any ideas?"
I do not know what you have tried until now. To boot off the cd, be sure that you are holding down the "c" key down while you start the computer and keep the key down. If you cannot start the computer that way, start the computer and immediately hold dow the "c" key, but be sure you keep the "c" key down. I have booted my 230s from a ZIP drive also. Also, try using a mounter using a mounting utility if the computer doesn't see a drive attached to the SCSI. I haven't had much luck with that, but once in a while it does work. If I didn't answer your question, maybe I do not understand it. Good luck. Dan S. in AZ ---------- Duo/2400 List, The friendliest place on the Net! A listserv for users and fans of Mac subportables. FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml> Be sure to visit Mac2400! <http://www.sineware.com/mac2400> To unsubscribe, E-mail to: <[EMAIL PROTECTED]> To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]> Need help from a real person? Try. <[EMAIL PROTECTED]> ---------- Dr. Bott | 10/100 Ethernet for your 2400 is finally here! MPC-100 | <http://www.drbott.com/prod/mpc100.html> RoadTools $30 PodiumPad available at Apple retail stores, $20 Traveler CoolPad at Staples. Both in white for iBooks at <http://roadtools.com> Midwest Mac Parts ][ <http://www.midwestmac.com> After-market parts for Macs. ][ 888-356-1104 ][ MacResQ Specials: LaCie SCSI CDR From $99! PowerBook 3400/200 Only $879! Norton AntiVirus 6 Only $19! We Stock PARTS! <http://www.macresq.com>
