Hi, Am Sonntag, 29. April 2007 12:33 schrieb Michael Riepe: > > > When I make a cut in the TS, DVBcut starts during export with lots of: > > > > Muxer problem: 00:02:47.454/02 > 00:02:46.809/79 (dts:00:02:46.809/79) > > s->getbuffree():4096 > > > > ....messages right after the cut position! Whitout a cut the export > > produces no warnings! > > I can't reproduce that with the 2min snippet I downloaded :( > I get at most one message.
Yeah,... it seems to depend on the position of the cut before... > > Unfortunately the 15min recording is not very suitable to detect > > sync-losses, since there are not very much dialogs... and also the 2min > > snippet showed no sync-loss, whereas the same scene in the full stream > > (WITH a view cuts!) showed some. > > Maybe the problem is somewhere else in the stream. Or there are lots of > small errors that accumulate. Do the sync errors go away after a cut > point? Or do they get worse and worse until the end of the movie? > They only occured after some (cut?) point... and it's hard to say if they are getting worse until the end... I would say yes, but it's just a 15min snipped and that's not easy to measure when it's only parts of a second... > > Vamps always has freezes... also in an uncutted (but with DVBcut > > exported) video... > > Did you try to play the DVD on your computer, e.g. with xine? Or did you > just play the "vampsed" file? AFAIK, the freezes happened only on my DVD-Player! BTW, only the picture freezes,... audio plays fine during the freeze frame, nevertheless also audio is slightly interrupted when video proceeds. ciao Ralph ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ DVBCUT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/dvbcut-user
