Look at the IC756 pro rig file -- I believe that it sets filter set two -- which is what you want and the commands for setting the filter should be the same.
73, Mike WA0SXV -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tom Branch Sent: Tuesday, July 23, 2002 20:03 To: DX4WIN Reflector Subject: [Dx4win] IC-746 and PC Control The quest continues. I was able to download a piece of freeware that allows me to watch the data as it flows between the PC and rig. The $06 command sets the mode. It appears that DX4WIN is sending $06 $03 to set the mode to CW. The rig defaults to CW Wide (i.e. no filter). Using the command $06 $03 $02, sets the mode to CW and sets the narrow filter! Now how to edit the radio file to send the longer data string.. This is not my strong area guys--any software types want to look at the ICOM 746.rig file and give me some ideas? 73 de Tom, K4NR
