Yes, you are correct and that's certainly good information. However, I'm one of those old-time RTTY guys who sometimes actually carries on a two-way conversation in RTTY mode! That makes the canned macros not always very useful. I find that I have 7 of the 8 function keys already populated with canned messages. If I had a couple of spares, then I could put just a "\" in one string (switch to receive) and "%T" in the other (switch to transmit). The alternate function keys selected by pressing CTRL, of course, defeats my goal of a single keystroke to switch. Now if we just had 12 function keys we could set up instead of the 8, that might be a reasonable alternative.
K8AC ----- Original Message ----- From: "Dave" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Wednesday, June 12, 2002 12:33 PM Subject: Re: [Dx4win] MMTTY xmit & rcv keys > Floyd et all > > For most of the standard messages the transmit and receive commands can be > embedded in the DX4WIN pre-programmed RTTY message function keys using "/" > and "%T" at the end of the line.The most useful info I have seen on this > was sent to me a few weeks ago by Larry K8UT and John WA9ALS. The info is > on John's WEB page at.... > > http://www.qsl.net/wa9als/dx4win-mmtty-macros.rtf . > <snip>
