Floyd, 8 x 2 = 16 keys (counting Ctrl key)
Paul At 02:35 PM 6/12/02 -0400, Floyd Sense wrote: >Yes, you are correct and that's certainly good information. However, I'm >one of those old-time RTTY guys who sometimes actually carries on a two-way >conversation in RTTY mode! That makes the canned macros not always very >useful. I find that I have 7 of the 8 function keys already populated with >canned messages. If I had a couple of spares, then I could put just a "\" >in one string (switch to receive) and "%T" in the other (switch to >transmit). The alternate function keys selected by pressing CTRL, of >course, defeats my goal of a single keystroke to switch. Now if we just had >12 function keys we could set up instead of the 8, that might be a >reasonable alternative. > >K8AC >----- Original Message ----- >From: "Dave" <[EMAIL PROTECTED]> >To: <[email protected]> >Sent: Wednesday, June 12, 2002 12:33 PM >Subject: Re: [Dx4win] MMTTY xmit & rcv keys > > >> Floyd et all >> >> For most of the standard messages the transmit and receive commands can >be >> embedded in the DX4WIN pre-programmed RTTY message function keys using "/" >> and "%T" at the end of the line.The most useful info I have seen on this >> was sent to me a few weeks ago by Larry K8UT and John WA9ALS. The info is >> on John's WEB page at.... >> >> http://www.qsl.net/wa9als/dx4win-mmtty-macros.rtf . >> ><snip> > >_______________________________________________ >Dx4win mailing list >[email protected] >http://mailman.qth.net/mailman/listinfo/dx4win ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Paul van der Eijk (KK4HD) [EMAIL PROTECTED] http://www.dx4win.com
