Hi All
There is a keep alive function in the AR Cluster nodes if the sysop has
it turned on. The K1TTT node does not have it activated. To check try the
K8SMC node at 198.109.212.235
I had he same problem staying connected during low activiy hours, even
with email checking every 8 minutes.
73 Phil K8MBY
----- Original Message -----
From: "STU" <[EMAIL PROTECTED]>
To: "DX4WIN POSTINGS" <Dx4win@mailman.qth.net>
Sent: Tuesday, November 05, 2002 12:05 AM
Subject: [Dx4win] Staying Connected to TELNET
> Is there anyone out there that has a hard time staying connected to
TELNET.
> I have a high speed cable connection that works great for the Internet. No
> problems!
> When connecting to a DX cluster via TELNET (with DX4WIN) and the activity
is
> somewhat slow, I seem to get disconnected. During peak times such as
> contests I stay connected just fine. I understand there is a so called
"keep
> alive" option either in DX4WIN or some other outside source. The idea is
to
> keep the traffic moving. If windows isn't seeing any traffic from you,
(some
> ISP's as well.) disconnect you so others can use the IP you were on. Is
> there a setting in DX4WIN using the TCP/IP setting with this so called
"keep
> alive" feature? Please advise. TNX, 73 STU
>
> Please respond to: [EMAIL PROTECTED]
>
>
> _______________________________________________
> Dx4win mailing list
> Dx4win@mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/dx4win
>
