If I am using stacking register "A" right now in the Phone portion of the band and I have the "B" stacking register loaded with something in the CW band, then why does DX4WIN change the "B" stacking register next time I click on a spot (or at least that's what it appears to do). I would expect it to set the frequency of the current stacking register, not switch to the other one and change frequency. I guess I can sorta understand why the software programmer may have done that, but it sure doesn't match the way I use these registers. If I remember correctly, WriteLog doesn't seem to do it this way.
----- Original Message ----- From: "Bruce Meier" <[EMAIL PROTECTED]> Date: Mon, 11 Oct 2004 05:38:37 -0500 To: <[EMAIL PROTECTED]> Subject: Re: [Dx4win] Packet Window Rig Control of FT1000MP > Kelly, > > Your FT1000 and DX4WIN are both working correctly and there is no config > change available. What is happening is by clicking on a spot, that frequency > is being loaded into the memory (one of the two stacking registers) on the > MP. The last frequency the MP is on is left in the register. > > Bruce- N1LN > > ----- Original Message ----- > From: <[EMAIL PROTECTED]> > To: <dx4win@mailman.qth.net> > Sent: Sunday, October 10, 2004 22:59 > Subject: [Dx4win] Packet Window Rig Control of FT1000MP > > > > This weekend I decided to use the packet window of DX4WIN for the first > time. > > I usually use an internet browser. I use an FT-1000MP. On this rig each > band has > > an "A channel" and a "B channel". Each press of the band button toggles > between > > "A" and "B". I usually keep one of the 2 channels centered in the lower > CW portion > > of the band and the other somewhere in the phone portion of the band so I > can > > easily switch between Phone and CW. The annoying thing I noticed was that > this > > seems to get screwed up if I "double-click" on a packet spot so that > DX4WIN sets > > my VFO frequency. It seems to switch to the other channel then set it to > the > > desired frequency. It took me awhile to figure out why my "A" and "B" > channels > > were getting screwed up. Does anyone know if there is some configuration > > item somewhere that will change this behavior? > > > > > > _______________________________________________ > > Dx4win mailing list > > Dx4win@mailman.qth.net > > http://mailman.qth.net/mailman/listinfo/dx4win >
