I have been looking at this, and I'm not sure yet how easy/difficult this change will be.
It is interesting to note though that DX4WIN had this problem for nine years and it suddenly rises to the top is a critical issue. -- Paul At 12:11 AM 2/24/2005, J. F. Samuels wrote: >I also struggle with this problem (CW QSOs back to 1952), and use a date >filter, when I remember to do so. DX4WIN should be aware of award start >dates to prevent the problems with spotting and generation of reports. > >John, K2CIB >----- Original Message ----- From: "Randy Farmer" <[EMAIL PROTECTED]> >To: <[email protected]>; <[EMAIL PROTECTED]> >Sent: Wednesday, February 23, 2005 7:08 PM >Subject: Re: [Dx4win] Pre 1975 CW DXCC confirmations > > >> >>>I started this thread so I'll chime in a bit more. It seems to me that >>>all the responders so far (including Rapidan thru some private emails) >>>have agreed that processing pre 1975 CW confirmations is a problem with >>>DX4WIN. Some suggestions have been offered to circumvent the problem >>>but all suggestions have required some manual manipulation either with >>>the data itself or the DXCC reports or both. Since this is a known >>>deficiency might it be better to develop some ways to change the DX4WIN >>>internals such that no manipulation is necessary? >> >>I've used DX4WIN for several years as my sole general logging program and >>still think it's the best of the lot. But... it's maddening that doing a >>...snip > > >_______________________________________________ >Dx4win mailing list >[email protected] >http://mailman.qth.net/mailman/listinfo/dx4win
