Steve, thanks for testing it. It's not a "print group names" issue, because I did not have that selected. I must have something configured incorrectly. Dick K7VC sent me his custom label file, which prints more than 3 labels with no trouble. I set up a new custom label with the exact same configuration which works for Dick, and it still only prints 3 Q's per label. That made me think it was a printer configuration issue, but the problem is present on both my inkjet and label printers. At this point, I'm not sure where to look, but I'll keep checking. If I come up with a "fix" I'll post it on the reflector. Thanks again.
Cliff K0CA -----Original Message----- From: Steve Bookout [mailto:[EMAIL PROTECTED] Sent: Thursday, February 02, 2006 7:14 PM To: Cliff Ahrens; [email protected] Cc: 'KK4HD'; 'NR4M' Subject: Re: Problem with Maximum QSOs Limited to 3 on a Custom Label Hello Cliff, I just tried it here by copying one of the very tall label formats to 'custom1'. I knew I had loads of CN8WW contacts from older contests so I did a search and found 22 of them. Set the print flags and printed them. I got 10 to a label! One thing to remember, if you have the option of 'printing 'roup names' on the labels, it will only print QSO's belonging to the same group on the same label. I tried it after invoking that option and only got max of 6 to a label (Worked them all bands in multiple contests.) So, seems to be working here. 73 de Steve, NR4M At 05:51 PM 2/2/2006, Cliff Ahrens wrote: >Is anyone able to print more than 3 QSO's on a custom label in DX4WIN >7.01? I'm printing a custom label which is designed with a label height >with room for 5 QSO's on a Dymo 400 Turbo Labelwriter. With the font, and >font size selected, the label has room for 5 QSOs plus the greeting line >at the bottom. With max QSOs set to "0" as instructed, the greeting line >prints OK on the bottom of the label, and there is plenty of blank space >for 5 QSO lines, but only 3 print per label. The preview of the label in >edit mode with "sample" QSO information ("Callsign 1" etc) shows 5 QSOs >fitting on the label. But the preview of the actual QSO infomation as >well as the printout is limited to 3 Q's, with blank space for more. > >I've tried changing the "Max QSOs" from 0 to 5 and even greater, and >still >only 3 print per label. I've also tried changing the fonts and font >sizes, with no luck. I also tried a different custom label with even >greater label height which would allow more than 12 QSOs per label. On >the preview, it showed more than 12 QSOs per label, but again, the actual >printout was limited to 3 per label. > >Anyone run into this issue? Paul, Steve, or anyone on the reflector, >any >suggestions? Thanks! > >Cliff K0CA > > 73 de Steve, NR4M Rapidan Data Systems [EMAIL PROTECTED] "DX4WIN... the way logging software should be" Free demo at www.dx4win.com *** PLEASE NOTE NEW EMAIL ADDRESS *** The old EROLS.COM address will be discontinued -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.375 / Virus Database: 267.15.0/248 - Release Date: 2/1/2006
