Sorry. Didn't read your previous posts close enough.
Mike ***************** Mike Rhodes wrote: > > File; Databases; Labels > MAx QSOs Window > > Mike / W8DN > > ***************** > > Cliff Ahrens wrote: > >> Steve, thanks for testing it. It's not a "print group names" issue, >> because >> I did not have that selected. I must have something configured >> incorrectly. >> Dick K7VC sent me his custom label file, which prints more than 3 labels >> with no trouble. I set up a new custom label with the exact same >> configuration which works for Dick, and it still only prints 3 Q's per >> label. That made me think it was a printer configuration issue, but the >> problem is present on both my inkjet and label printers. At this >> point, I'm >> not sure where to look, but I'll keep checking. If I come up with a >> "fix" >> I'll post it on the reflector. Thanks again. >> >> Cliff K0CA >> >> -----Original Message----- >> From: Steve Bookout [mailto:[EMAIL PROTECTED] Sent: Thursday, >> February 02, 2006 7:14 PM >> To: Cliff Ahrens; [email protected] >> Cc: 'KK4HD'; 'NR4M' >> Subject: Re: Problem with Maximum QSOs Limited to 3 on a Custom Label >> >> >> Hello Cliff, >> >> I just tried it here by copying one of the very tall label formats to >> 'custom1'. >> I knew I had loads of CN8WW contacts from older contests so I did a >> search and found 22 of them. Set the print flags and printed them. >> I got 10 to a label! >> >> One thing to remember, if you have the option of 'printing 'roup >> names' on the labels, it will only print QSO's belonging to the same >> group on the same label. I tried it after invoking that option and >> only got max of 6 to a label (Worked them all bands in multiple >> contests.) >> >> So, seems to be working here. >> >> 73 de Steve, NR4M >> >> At 05:51 PM 2/2/2006, Cliff Ahrens wrote: >> >> >>> Is anyone able to print more than 3 QSO's on a custom label in DX4WIN >>> 7.01? I'm printing a custom label which is designed with a label >>> height with room for 5 QSO's on a Dymo 400 Turbo Labelwriter. With >>> the font, and font size selected, the label has room for 5 QSOs plus >>> the greeting line at the bottom. With max QSOs set to "0" as >>> instructed, the greeting line prints OK on the bottom of the label, >>> and there is plenty of blank space for 5 QSO lines, but only 3 print >>> per label. The preview of the label in edit mode with "sample" QSO >>> information ("Callsign 1" etc) shows 5 QSOs fitting on the label. >>> But the preview of the actual QSO infomation as well as the printout >>> is limited to 3 Q's, with blank space for more. >>> >>> I've tried changing the "Max QSOs" from 0 to 5 and even greater, and >>> still >>> only 3 print per label. I've also tried changing the fonts and font >>> sizes, with no luck. I also tried a different custom label with >>> even greater label height which would allow more than 12 QSOs per >>> label. On the preview, it showed more than 12 QSOs per label, but >>> again, the actual printout was limited to 3 per label. >>> >>> Anyone run into this issue? Paul, Steve, or anyone on the >>> reflector, any >>> suggestions? Thanks! >>> >>> Cliff K0CA >>> >>> >>> >> >> >> >> 73 de Steve, NR4M >> >> Rapidan Data Systems >> [EMAIL PROTECTED] >> >> "DX4WIN... the way logging software should be" >> >> Free demo at www.dx4win.com >> >> *** PLEASE NOTE NEW EMAIL ADDRESS *** >> >> The old EROLS.COM address will be discontinued >> >> >> >> > >
