File; Databases; Labels MAx QSOs Window Mike / W8DN
***************** Cliff Ahrens wrote: >Steve, thanks for testing it. It's not a "print group names" issue, because >I did not have that selected. I must have something configured incorrectly. >Dick K7VC sent me his custom label file, which prints more than 3 labels >with no trouble. I set up a new custom label with the exact same >configuration which works for Dick, and it still only prints 3 Q's per >label. That made me think it was a printer configuration issue, but the >problem is present on both my inkjet and label printers. At this point, I'm >not sure where to look, but I'll keep checking. If I come up with a "fix" >I'll post it on the reflector. Thanks again. > >Cliff K0CA > >-----Original Message----- >From: Steve Bookout [mailto:[EMAIL PROTECTED] >Sent: Thursday, February 02, 2006 7:14 PM >To: Cliff Ahrens; [email protected] >Cc: 'KK4HD'; 'NR4M' >Subject: Re: Problem with Maximum QSOs Limited to 3 on a Custom Label > > >Hello Cliff, > >I just tried it here by copying one of the very tall label formats to >'custom1'. >I knew I had loads of CN8WW contacts from older contests so I did a search >and found 22 of them. Set the print flags and printed them. I got 10 to a >label! > >One thing to remember, if you have the option of 'printing 'roup names' on >the labels, it will only print QSO's belonging to the same group on the >same label. I tried it after invoking that option and only got max of 6 to >a label (Worked them all bands in multiple contests.) > >So, seems to be working here. > >73 de Steve, NR4M > > At 05:51 PM 2/2/2006, Cliff Ahrens wrote: > > >>Is anyone able to print more than 3 QSO's on a custom label in DX4WIN >>7.01? I'm printing a custom label which is designed with a label height >>with room for 5 QSO's on a Dymo 400 Turbo Labelwriter. With the font, and >>font size selected, the label has room for 5 QSOs plus the greeting line >>at the bottom. With max QSOs set to "0" as instructed, the greeting line >>prints OK on the bottom of the label, and there is plenty of blank space >>for 5 QSO lines, but only 3 print per label. The preview of the label in >>edit mode with "sample" QSO information ("Callsign 1" etc) shows 5 QSOs >>fitting on the label. But the preview of the actual QSO infomation as >>well as the printout is limited to 3 Q's, with blank space for more. >> >>I've tried changing the "Max QSOs" from 0 to 5 and even greater, and >>still >>only 3 print per label. I've also tried changing the fonts and font >>sizes, with no luck. I also tried a different custom label with even >>greater label height which would allow more than 12 QSOs per label. On >>the preview, it showed more than 12 QSOs per label, but again, the actual >>printout was limited to 3 per label. >> >>Anyone run into this issue? Paul, Steve, or anyone on the reflector, >>any >>suggestions? Thanks! >> >>Cliff K0CA >> >> >> >> > > >73 de Steve, NR4M > >Rapidan Data Systems >[EMAIL PROTECTED] > >"DX4WIN... the way logging software should be" > >Free demo at www.dx4win.com > >*** PLEASE NOTE NEW EMAIL ADDRESS *** > >The old EROLS.COM address will be discontinued > > > > >
