I don't ever use my Winkey2 with DX4WIN but just checked it and it seems to work OK. I'm running DX4WIN 7.02.15. My virtual com port is set up as Com8.
Alan N5NA Pete Smith wrote: > I'm having the same problem. Just switched to 7.02.15, which I upgraded to > from 6.03, largely because of Winkey support. It appears, however, that > DX4WIN can't address the virtual serial ports created by the USB driver. I > have set up COM7 for Winkey, but get no indication that they are > communicating with each other. When I monitor the port, there is no > indication of any data flow from DX4WIN to the Winkey. > > Can anyone confirm if this is a known limitation of the current release of > DX4WIN? The virtual serial ports seem to work fine for rig control (using a > MK2R+, which has an embedded Winkey 2). > > 73, Pete N4ZR > > At 04:32 PM 1/22/2007, Mark wrote: > >> I've had some problems with using my new WINKEY2 (USB) with DX4WIN. >> (works ok with the WINKEYER2) >> >> Would like to hear from someone who has been successful in using this. (and >> if >> it's possible to key alternate rigs using it within DX4WIN) >> >> Mark n2qt >> >> From [EMAIL PROTECTED] Mon Jan 22 23:33:46 2007 From: [EMAIL PROTECTED] (Jim Reisert AD1C) Date: Mon Jan 22 23:35:29 2007 Subject: [Dx4win] FT-2000 radio file In-Reply-To: <[EMAIL PROTECTED]> References: <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> At 09:47 AM 1/22/2007, KR4DA wrote: >I still cannot read the QSX frequency from my FT-2000 >I have to enter it manually..... > >How is the FT-2000 working for you other guys who have one.. >If it's working for you ANNOUNCE DX no probplem please email me direct... Did you try the .RIG file on http://dx4win.ad1c.us/ 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, <[EMAIL PROTECTED]>, http://www.ad1c.us
