OK, Jim et al - I found my problem. On the CW tab, I had identified COM7 as both my Winkey port and my software CW port. Changing the latter to None started things working properly. I shoulda guessed!
73, Pete N4ZR At 11:38 PM 1/22/2007, Jim Reisert AD1C wrote: >At 05:22 PM 1/22/2007, Pete Smith wrote: > >>I'm having the same problem. Just switched to 7.02.15, which I upgraded to >>from 6.03, largely because of Winkey support. It appears, however, that >>DX4WIN can't address the virtual serial ports created by the USB driver. I >>have set up COM7 for Winkey, but get no indication that they are >>communicating with each other. When I monitor the port, there is no >>indication of any data flow from DX4WIN to the Winkey. > >I am using a microHam microKEYER and the Winkey device keys perfectly in >DX4WIN. It also works in Writelog. > >In the DX4WIN CW Preferences, I set Device type to Winkey and Port to COM7. >All other boxes are None or 0. Make sure that the virtual COM port is for >Winkey only, and is not used by any other device in DX4WIN. > >73 - Jim AD1C > > >-- >Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 >USA +978-251-9933, <[EMAIL PROTECTED]>, http://www.ad1c.us
