This might might get it going for you. Download and install DX4WIN 7.07.
Use the "Elecraft K3 X4" rig file that downloads with version 7.07. If you are using LP_Bridge, I have found that something gets out of whack with it at times. When LP_Bridge gets off track, modes on VFO B and split can be wrong after double clicking a DX spot. Restarting LP_Bridge seems to correct the problem. I hope this helps. 73, Bob - N9SF At 08:27 AM 2/3/2009, Robert Naumann wrote: >I looked through the archives, and I did not see a response to Steve's >question below. > >I am seeing exact same behavior on my K3 now too. Using 7.07.02. > >With split being turned off for no reason, it makes one a lid very quickly >in a split pileup situation. > >Is there a resolution to this? > >73, > >Bob W5OV > >-----Original Message----- >From: [email protected] [mailto:[email protected]] >On Behalf Of inventor_sixty_one >Sent: Monday, December 08, 2008 9:59 PM >To: [email protected] >Subject: [Dx4win] 7.06 won't set split on K3 > >I wonder what I am doing wrong ... in either the manual 'set >frequency' tool, or by selecting a DX spot that is set for split VFO >mode, the 'split' indicator on the K3 is activated ... but does not >stay in that mode. It just 'clicks' to split mode for a moment and >then reverts to VFO A mode. > >manually going into split mode on the radio works fine. > >I have tried this at both 4800 and 38400 bps speeds, to see if that >made any difference. None. > >Ideas? > >Steve KZ1X/4 >_______________________________________________ >Dx4win mailing list >[email protected] >http://mailman.qth.net/mailman/listinfo/dx4win > >______________________________________________________________ >Dx4win mailing list >Home: http://mailman.qth.net/mailman/listinfo/dx4win >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:[email protected] > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
