I looked through the archives, and I did not see a response to Steve's question below.
I am seeing exact same behavior on my K3 now too. Using 7.07.02. With split being turned off for no reason, it makes one a lid very quickly in a split pileup situation. Is there a resolution to this? 73, Bob W5OV -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of inventor_sixty_one Sent: Monday, December 08, 2008 9:59 PM To: [email protected] Subject: [Dx4win] 7.06 won't set split on K3 I wonder what I am doing wrong ... in either the manual 'set frequency' tool, or by selecting a DX spot that is set for split VFO mode, the 'split' indicator on the K3 is activated ... but does not stay in that mode. It just 'clicks' to split mode for a moment and then reverts to VFO A mode. manually going into split mode on the radio works fine. I have tried this at both 4800 and 38400 bps speeds, to see if that made any difference. None. Ideas? Steve KZ1X/4 _______________________________________________ Dx4win mailing list [email protected] http://mailman.qth.net/mailman/listinfo/dx4win ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
