Hi Doug, Maybe an option is to disable the hardware from Modem #1 Line Record, Or Delta AP 1/2 and Delta AP Monitor in your system settings and check afterwards If the microham codec is visual now in dx4win setup.
Guy ON4AOI > -----Oorspronkelijk bericht----- > Van: [email protected] [mailto:dx4win- > [email protected]] Namens Doug Joyce > Verzonden: zaterdag 10 juli 2010 23:21 > Aan: DX4WIN Reflector > Onderwerp: [Dx4win] Using PSK in Ver 8.03 - using K3 and microKEYER II > > I'm having difficulty with using PSK from within DX4Win on one of my > systems. - Let me explain > > PSK in System A works ok - both Rx and Tx (as does CW, RTTY-FSK and > SSB). System A is an FT-1000D with a microKEYER II (FW 4.6) running on > a Dell Latitude D830 (Win XP SP3) - software is Router 7.7.0 and DX4Win > Ver 8.03. > > PSK in System B does NOT work - either Rx or Tx (although CW, RTTY FSK- > D and SSB are ok). System B is a K3 with microKEYER II (FW 4.6) > running on a Dell Dimension 8300 (Win XP SP3) - software is Router > 7.7.0 and DX4Win Ver 8.03. > > Trouble shooting has identified one area that I think is causing the > problem but don't know how to fix it. > > When I go to Router=>options=>audio devices=>show list of audio devices > - the MicroHam CODEC is listed in each of the three columns: Wave Out, > Wave In and Mixer - for both Systems A & B. > > In Wave Out, if I highlight the MicroHAM CODEC and click "Test", the > "SC" light comes on, a tone is generated and with each radio in USB > mode, the PTT1 light comes on and RF is produced - for both Systems A & > B. > > However when I open DX4Win for each system and go to File => > Preferences => Control and look in the PSK Sound Card window, > (a) for System A, the microHAM CODEC is listed as an option and has > been chosen - > (b) for System B, the microHAM CODEC is NOT listed as an option. The > box shows five other choices - default, SB Audigy 2 audio (CC40), Modem > #1 Line Record, Delta AP 1/2 and Delta AP Monitor. (The box is only > big enough for 5 entries and I can't scroll down). > > Assuming that not being able to choose the microHAM CODEC as the PSK > sound card for System B is causing the problem, what do I need to do to > have DX4Win recognize the microHAM CODEC? > > Thoughts from anyone would be appreciated. > > Thanks & 73 > > Doug Joyce, VE3MV > ______________________________________________________________ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
