Further to the attached and thanks to the suggestion from Guy (ON4AOI) , I think I've got it fixed. Here is what it took.
In XP, I went to the Device Mgr and in the Sound, video & game controllers, turned OFF the Creative SB Audigy and M Audio Delta Audiophile cards. I then turned on the K3 and mKII, launched Router and DX4Win and in File/Preferences/Control confirmed that the microHAM CODEC was now listed as one of the PSK sound cards. I selected it for both Input and Output, saved the changes and exited. Now when I opened the PSK window in DX4Win things worked - both Rx and Tx. I went back to the Device Mgr and in the Sound, video & game controllers, turned back ON the Creative SB Audigy and M Audio Delta Audiophile cards. I had to reselect microHAM CODEC as the PSK sound card in DX4Win - it was still listed.. There was however now a problem with MMTTY - I opened the MMTTY window, and in the RTTY Control Panel, went to Options / Setup / Sound Cards and (re) selected microHAM CODEC for both Rx and Tx. Both PSK and MMTTY now seem to be operating properly. In summary, need to ensure that the microHAM CODEC is chosen as the sound card for both PSK and MMTTY. 73, Doug VE3MV ----- Original Message ----- From: Doug Joyce To: DX4WIN Reflector Sent: Saturday, July 10, 2010 5:20 PM Subject: Using PSK in Ver 8.03 - using K3 and microKEYER II I'm having difficulty with using PSK from within DX4Win on one of my systems. - Let me explain PSK in System A works ok - both Rx and Tx (as does CW, RTTY-FSK and SSB). System A is an FT-1000D with a microKEYER II (FW 4.6) running on a Dell Latitude D830 (Win XP SP3) - software is Router 7.7.0 and DX4Win Ver 8.03. PSK in System B does NOT work - either Rx or Tx (although CW, RTTY FSK-D and SSB are ok). System B is a K3 with microKEYER II (FW 4.6) running on a Dell Dimension 8300 (Win XP SP3) - software is Router 7.7.0 and DX4Win Ver 8.03. Trouble shooting has identified one area that I think is causing the problem but don't know how to fix it. When I go to Router=>options=>audio devices=>show list of audio devices - the MicroHam CODEC is listed in each of the three columns: Wave Out, Wave In and Mixer - for both Systems A & B. In Wave Out, if I highlight the MicroHAM CODEC and click "Test", the "SC" light comes on, a tone is generated and with each radio in USB mode, the PTT1 light comes on and RF is produced - for both Systems A & B. However when I open DX4Win for each system and go to File => Preferences => Control and look in the PSK Sound Card window, (a) for System A, the microHAM CODEC is listed as an option and has been chosen - (b) for System B, the microHAM CODEC is NOT listed as an option. The box shows five other choices - default, SB Audigy 2 audio (CC40), Modem #1 Line Record, Delta AP 1/2 and Delta AP Monitor. (The box is only big enough for 5 entries and I can't scroll down). Assuming that not being able to choose the microHAM CODEC as the PSK sound card for System B is causing the problem, what do I need to do to have DX4Win recognize the microHAM CODEC? Thoughts from anyone would be appreciated. Thanks & 73 Doug Joyce, VE3MV ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
