Would help if you mentioned the radio. All drivers are not the same. On 2011-02-04 19:28, N0KK,Kirk wrote: > I upgrade to 8.04 I also switched PC's. > > Pulled all ini files etc to new PC all is working well...rotor controls, > internet etc. Where I'm running into conflict is in the radio control. > > Let me preface this by saying the rig control is working as it should in > all other programs I use. Writelog, MMTTY..etc > > What is happening is this...WHILE I tune the radios frequency knob...The > cursor blinks and freq reads as it should. If I STOP tuning..cursor > stops blinking and radio times out. > > I made NO changes to the rig settings and as a stated I used the ini > file from my other pc. > > Anyone with some thoughts? > > Kirk > > > ______________________________________________________________ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected]
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
