rig file is latest made by on4aoi (as you know Guy)
i doubt rig file has anything to do with the fact that soft read freq/mode of last received dxspot ----- Original Message ----- From: ON4AOI To: 'on4iq' Cc: [email protected] Sent: Friday, April 01, 2011 1:10 PM Subject: RE: dx4win and FT5000 First tell us what RIGFILE you use ? probably an old one for the ft2000 or ft9000, In dx4w805 is a new rigdriver for the FT5000, dated 2 januari 2011 so why stay on dx4w804 ? Guy ON4AOI Van: on4iq [mailto:[email protected]] Verzonden: vrijdag 1 april 2011 12:32 Aan: [email protected]; [email protected]; [email protected] Onderwerp: dx4win and FT5000 I recently connected the FT5000 to the PC with dx4win as logging software. Following strange behaviour has been noticed: When operating in CW (any band) the logging software reads the mode as ssb, or psk31 when the rig is in TX. I doubt that it is a RFI problem as it occurs on any band, any power level. even with only the ptt closed (that is 0 watts out) All the rs232 are shielded. The freq (khz) in the main dx4win , disappears aswell Occassionally the is 0.00 in it, giving an error when logging. Has anyone similar observations? 73 Johan ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
