Maybe you disconnect and connect an other cable (for example a mobile
phone). So when it is connected before the radio turns on, the phone
will get com3 and radio com7. Either the radio gets the com3....
73 Kostas SV1DPI
Στις 18/12/2013 9:44 μμ, ο/η n4dsp έγραψε:
Kostas,
I do not disconnect the USB Cable.
john
On 12/18/2013 2:34 PM, Kostas SV1DPI wrote:
If I have understand well, you have a kenwood 590 connected via the
usb cable. This connection creates a virtual com (there is not a real
com port). The virtual com port is either com 3 and either com 7. As
I know this only happens if you plug the usb cable in a different usb
port. Please check if you plug it in the same usb port every time or
in a different one. Normally if you plug it in the same port you will
always get the same com port number.
73 Kostas SV1DPI
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
