Hello Joel, Please check to see if you have cleared any filters before printing. If you do your QSLs the same way I do, going through a string of cards with F8 (search) and F2 (mark for printing), and then go to print, you still have the filter for that last QSO and that's the only one that will print. Clear the filters, and then print. Don't ask me how many times I have learned this same thing, over and over!
-- 73, Mike Cizek W0VTT -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Monday, February 01, 2021 14:24 To: [email protected] Subject: [Dx4win] Only One QSL Label Prints I need some assistance with a QSL label printing issue I can't resolve. This started some time ago but I'm not exactly sure whether it was after a program upgrade 9.0 or something else, and this may not be a DX4Win issue. When I go to print QSL labels the print window appears and at the top of that window it will correctly identify how many labels are to be printed, however when I select "Print" only one of the labels in the que will print and no others. The only way around this is to mark each QSO label to be printed with a "Y" in the QSO window one at a time. The labels print fine, I just can't seem to get more than one to print. What am I missing? Any suggestions? 73 Joel W5ZN ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
