Thanks Alan. Surely Jim reads it here and when he can answer him, he will do it, because the mail is placed on the list of mail and he will be able to see them. All the best. EA8AM
El dom, 27 feb 2022 a las 1:57, Alan Zack (<k7...@cox.net>) escribió: > I would suggest you contact Jim AD1C. He is the expert. If there is a way > he will know how. > > Good Luck > > > > Alan Zack > > Amateur Radio Station K7ACZ > > > > *From:* Luc > *Sent:* Saturday, February 26, 2022 12:21 PM > *To:* k7...@cox.net > *Cc:* UA3AGW Dmitry Zaslavsky <ua3...@mail.ru> > *Subject:* Re: [Dx4win] Counties > > > > Alan, I definitely think this is a version issue. 8.05, which is the one > I use, does not have the implementation to be able to write the username > and password. > > I think that option was implemented in version 9. > > A pity, but I don't think anything can be done. > > Greetings. > > EA8AM > > > > El sáb, 26 feb 2022 5:44, Luc <canary...@gmail.com> escribió: > > Thanks Alan, but as much as I search, I can't see those fields that appear > on your screenshot, as you can see in the screenshot that I sent you. > > Those fields are missing that I don't see how to make them appear. > > Maybe Jim can help us. > > Thanks again and have a nice weekend. > > 73 EA8AM > > > > El sáb, 26 feb 2022 4:17, Alan Zack <k7...@cox.net> escribió: > > OK Luc, > > > > I am sorry but I am out of ideas. It looks to me that the F3 key, > CALLSIGN/MGR LOOKUP window would get the info from qrz.com as you have it > set up. If you like we can ask Jim, AD1C, the DX4WIN expert, for his ideas > > > > Alan Zack > > Amateur Radio Station K7ACZ > > > > > > *From:* Luc > *Sent:* Thursday, February 24, 2022 11:54 PM > *To:* k7...@cox.net > *Cc:* UA3AGW Dmitry Zaslavsky <ua3...@mail.ru> > *Subject:* Re: [Dx4win] Counties > > > > Hello again Allan. > > I have reviewed, the parameters at EXT DATA, and differ from which you > indicate to the screenshot. > > Specifically, the Initial Field Callsign Lookup Address and the User Info > and Password fields, which I use to access the QRZ.COM page. > > It will be that I am using version 8.05 of DX4WIN and you use a later one? > I attach you a screenshot so you can see what I am commenting on you. > > All the best. > > EA8AM > > > > El jue, 24 feb 2022 a las 22:40, Alan Zack (<k7...@cox.net>) escribió: > > I apologize, I did not explain fully. > > From the main window select the SETUP PARAMETERS window. Go to the EXT > tab. The address setup window will open. I have attached a copy of my > settings. I think the information for the F3 window comes from the setup in > the lower half of the window. I say that because the address info in the > top half of the window does NOT have the ENABLE box checked (tic) > > You will notice the bottom half of the window has both lower ENABLE tabs > checked (tic). > > It has been a LONG time since I set this up but if I remember correctly I > had to set up the qrz.com addresses exactly as I have it. I assume you > have a qrz.com account. I placed my qrz.com log on info in the windows > where it is requested. I don’t know what happens if you leave it blank. > This assumes the PC you are using DX4WIN is connected to the internet so it > can connect to qrz.com. > > I do have the Flying Horse CD address in the very top window as I have it > installed in my PC. Maybe this is where the F3 info comes from but I am not > sure. I do not have that area set as ENABLE so I am thinking it may be out > of the loop. > > Try my settings and if you still can’t get the F3 window to populate the > info I will experiment with my settings to determine where this info comes > from. > > Good luck > > > > Alan Zack > > Amateur Radio Station K7ACZ > > > > *From:* Luc > *Sent:* Thursday, February 24, 2022 05:08 AM > *To:* k7...@cox.net > *Subject:* Re: [Dx4win] Counties > > > > Alan, sincerely did not know that function, he had never used it. > > Pressing F3 When you enter an American indicative, and in the CallSign / > MRG Lookup window it appears blank, the callsign appears only, but no other > information. > > Even the Update QSO option is not highlighted. > > I have checked in File / Preferences / and Setup Parameters / Ext Data I > have at callsign Lookup address: https // www.qrz.com / db / I'm sure I'm > doing something wrong. > > All the best. > > EA8AM > > > > El jue, 24 feb 2022 a las 0:07, Alan Zack (<k7...@cox.net>) escribió: > > You may already know this but just in case, with the main QSO window open, > you click the F3 key a window will open marked CALLSIGN/MGR. This show QSL > info for the call. If the call is a USA/KP4/KP2/KL7/KH6 call the county > will be shown in this window. If you click Update QSO in the bottom of this > window it will fill in the ops first name, his state, county, and grid in > the QSO window. When you set up this window right click on the window then > select (tic on) Automatic update. Hope this helps > > Alan Zack > Amateur Radio Station K7ACZ > > > -----Original Message----- > From: dx4win-boun...@mailman.qth.net On Behalf Of Jim Reisert AD1C > Sent: Tuesday, February 22, 2022 08:23 AM > To: UA3AGW Dmitry Zaslavsky <ua3...@mail.ru> > Cc: DX4WIN <dx4win@mailman.qth.net> > Subject: Re: [Dx4win] Counties > > On Mon, Feb 21, 2022 at 1:59 PM UA3AGW Dmitry Zaslavsky wrote: > > > My LIfelong Dream for DX4WIN is — that SW automatically populates empty > blanks with counties ( or at least — new counties) that I didn't manually > enter based on the QSLs or QSOs made in State QSO Parties received which > were not entered by myself manually based on QSLs reveived or QSOs in the > County Parties. > > County hunting is a noble, if not difficult pursuit. I have worked and > confirmed all 3077 US Counties on both CW and SSB, but have never had time > to submit for the USACA award. Hopefully, I will have time when I retire. > I am within 100 confirmations of 20 meters only. I have over 2000 worked > on digital, but I am not trying to confirm them. > > Regarding state QSO parties, if you logged them using a logging program > that can output ADIF to import into DX4WIN, please look at this utility > that I wrote: > > https://ad1c.us/dx4win/adif2dxq/ > > This will convert the county abbreviations to counties in DX4WIN. > > If you still have the state QSO party county abbreviations in your DX4WIN > log, I could try to convert them for you, but it may take time to come up > with the right program to do it. Please contact me off the reflector. > > > -- > > > -- Si reenvía este correo, es OBLIGACIÓN LEGAL según la "Agencia Española de Protección de Datos de Carácter Personal" proteger la intimidad de sus contactos, para ello y para evitar SPAM (correo no deseado) hay que seguir los siguientes pasos: 1.- Borre la dirección del remitente y cualquier otra dirección que aparezca en el cuerpo del mensaje. 2.- Introduzca los destinatarios en el apartado CCO (CON COPIA OCULTA) Recuerde: Para: Déjelo en blanco. Ccc: Déjelo en blanco. Cco: Incluya aquí a sus destinatarios. Coloque esta nota en sus mensajes. GRACIAS POR COLABORAR. ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
