I have been trying to get the cw port working for a couple of weeks. I am running windows XP, so I am using DTR on my radio serial port. (The help file states "DXbase allows you to use the same serial port for CW that is used for your TNC or HF radio provided it does not use the DTR leads.") When I set "default DTR High" on the radio port settings, my radio keys up, which is correct. However, whe I try to send CW, I get nothing.
I have tried setting the com port address in the driver using 'regedit' to no avail. When I look at my com port address in my system\hardware\device manger\com4\resources, it shows "I/O range C400-C407" and "IRQ17", so I set the com4 data in regedit as follows: "SYSTEM\CurrentControlSet\Services\DriverX\Parameters\Dxb98 COM4\ Port Base 0x0000c400 (50176)" PortCount says "0x00000007 (7)" (Default) says "(value ot set)" and IgnoreConflicts says "0x00000001 (1)" Does anybody have any suggestions. I operate primarily CW, so this limitation may be enough for me to look at another logging program. Thanks for any assistance! Regards, Marty Ray N9SE
