JV,
I had the exact same problem with my 756Pro with DXBase 2005 and DX Atlas
2.25. I evently got it fixed but it was a while ago. I think I fixed it but
changing the pacing in my radio.ini file. Here's what I have in there now -
GL
Dale, AA1QD
[ICOM_IC-756Pro]
P_LSB=0
P_USB=1
P_CW_USB=0
P_CW_LSB=0
P_AM=2
P_FM=5
P_FM_N=0
P_DATA_LSB=0
P_DATA_USB=0
P_DATA_FM=0
P_CW=3
P_FSK=4
P_RTTY=4
P_PACKET=4
P_CWR=3
LSB=0
USB=1
AM=2
CW=3
FSK=4
RTTY=4
FM=5
CWR=3
HIGH=1
MEDIUM=2
LOW=2
Address=0x5c
PACING=10
FREQDIVIN=1
FREQDIVOUT=1
USEEXTENDEDMODES=0
FREQSHIFT=0
DefaultCW=3
DefaultFSK=4
DefaultRTTY=4
DefaultFM=5
DefaultAM=2
DefaultCWR=3
SelectVFOA= hex(fe) hex(fe) hex(%ra) hex(e0) hex(07) hex(d0) hex(fd)
eoc(100)
SetVFOA= hex(fe) hex(fe) hex(%ra) hex(e0) hex(00) bcd(%vfoa,5) hex(fd)
eoc(100)
GetVFOA= hex(fe) hex(fe) hex(%ra) hex(e0) hex(03) hex(fd) rrs(16) eoc(100)
PrsVFOA= hex(%dummy, 11) bcd(%vfoa,5) eoc(0)
SelectVFOB= hex(fe) hex(fe) hex(%ra) hex(e0) hex(07) hex(d1) hex(fd)
eoc(100)
SetVFOB= hex(fe) hex(fe) hex(%ra) hex(e0) hex(00) bcd(%vfob,5) hex(fd)
eoc(100)
GetVFOB= hex(fe) hex(fe) hex(%ra) hex(e0) hex(03) hex(fd) rrs(16) eoc(100)
PrsVFOB= hex(%dummy, 11) bcd(%vfob,5) eoc(0)
SetMode= hex(fe) hex(fe) hex(%ra) hex(e0) hex(06) hex(%mode) hex(fd)
eoc(100)
GetMode= hex(fe) hex(fe) hex(%ra) hex(e0) hex(04) hex(fd) rrs(13) eoc(100)
PrsMode= hex(%dummy, 11) hex(%mode) hex(%dummy) eoc(0)
SetFilter= hex(fe) hex(fe) hex(%ra) hex(e0) hex(06) nib("%mode %filter")
hex(fd) eoc(100)
GetFilter= hex(fe) hex(fe) hex(%ra) hex(e0) hex(04) hex(fd) eoc(100)
PrsFilter= hex(fe) hex(fe) hex(e0) hex(%dummy) hex(04) nib("%mode %filter")
hex(fd) eoc(0)
SetSplit= hex(fe) hex(fe) hex(%ra) hex(e0) hex(07) hex(c0) hex(fd) eoc(100)
hex(fe) hex(fe) hex(%ra) hex(e0) hex(0f) hex(%split) hex(fd) eoc(100)
GetSplit= hex(fe) hex(fe) hex(%ra) hex(e0) hex(17) hex(fd) rrs(12) eoc(100)
PrsSplit= hex(%dummy, 10) bit(%split, 0) hex(%dummy) eoc(0)
>Date: Fri, 27 May 2005 19:36:51 -0400 (Eastern Daylight Time)
>From: "JV" <[EMAIL PROTECTED]>
>Subject: [Dxbase] Frequency
>To: "Z DX Base" <[email protected]>
>Message-ID: <[EMAIL PROTECTED]>
>Content-Type: Text/Plain; charset="iso-8859-1"
> Ran into a strange problem last night. I had monitor 1 set to DXBase
>2005 and Monitor 2 to DX Atlas 2.25. After I had logged serval QSOs, I
>happen to look at the frequency that was logged. All QSOs were 363416.56
>and
>the band was 75. I closed DX Atlas and the frequencies were logged OK.
>Open
>DX Atlas back up and got the same problem. Anyone have this happen to them
>and if so, what's the cure. Using 2.4 MHz and XP pro. Rig is an IC-756
>pro.
>JV
