Fred, Upon further reading of your post below, I don't believe there are any ADIF field "definitions" in the DXB help files. The instructions on the Import screen are on how to use the DXB provided entry fields. This assumes you want all the Spec1 fields populated with the same bit of info. If you want different info for each QSO to populate into the Spec1 field then you will have to take that issue up with the author of whatever software you are using to create the ADIF file, or manually edit your ADIF file to add the <SPEC1:n> information for each record in the file.
A Google search yielded the following link that may provide you additional info about ADIF field "definitions". www.hosenose.com/adif/adif.html Note that there is nothing there about Spec1 as I believe that is a user optional field unique to DXbase. Other logging programs probably will not have this defined. Gary AL9A ----- Original Message ----- From: "Fred Handscombe" <[EMAIL PROTECTED]> To: "Gary Senesac AL9A" <[EMAIL PROTECTED]>; "'DXBase reflector'" <[email protected]> Sent: February 07, 2006 10:34 AM Subject: Re: [Dxbase] Special-1 import > Yes I read all that > > Please tell me EXACTLY where it defines the adif fields, specifically where > it tells me that I need to use field SPEC1 to import something into the > Special-1 column? Which was my original question. > > Searching on "special" does not reveal the information > > Thanks > > Fred > > ----- Original Message ----- > From: "Gary Senesac AL9A" <[EMAIL PROTECTED]> > To: "Fred Handscombe" <[EMAIL PROTECTED]>; "'DXBase > reflector'" <[email protected]> > Sent: Tuesday, February 07, 2006 6:31 PM > Subject: Re: [Dxbase] Special-1 import > > > > There IS a import reference in DXbase. However, it's not in the main DXB > > Help file. Start the Non-DXbase import utility located in the DXbase > > workgroup. Select the Target .mdb file you wish to import the data into. > > When the main Import screen opens, click on the Menu item Help/Help > > Topics. > > This is a separate Help file devoted just to doing Non-DXbase imports. I > > do > > three or four Non-DXbase imports a month to get my Writelog contest logs > > into my main DXB log. After you do that many, it gets progressively > > easier! > > Gary AL9A > > > > ----- Original Message ----- > > From: "Fred Handscombe" <[EMAIL PROTECTED]> > > To: "Jack" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>; "'DXBase reflector'" > > <[email protected]> > > Sent: February 07, 2006 8:46 AM > > Subject: Re: [Dxbase] Special-1 import > > > > > >> Thanks to you all for your help > >> > >> It would be VERY useful to have a reference list somewhere in the DXbase > >> documentation, otherwise I will probably be asking again on another 1 or > >> 2 > >> years! > >> > >> 73 FRed > >> > >> ----- Original Message ----- > >> From: "Jack" <[EMAIL PROTECTED]> > >> To: <[EMAIL PROTECTED]>; "'Fred Handscombe'" > >> <[EMAIL PROTECTED]>; "'DXBase reflector'" > >> <[email protected]> > >> Sent: Tuesday, February 07, 2006 3:06 AM > >> Subject: Re: [Dxbase] Special-1 import > >> > >> > >> > DXbase supports special field names of SPEC1 and SPEC2 for ADIF. The > >> > length of both is limited to ten characters. > >> > > >> > Regards, > >> > Jack > >> > > >> > ----- Original Message ----- > >> > From: "Eric - VE3GSI" <[EMAIL PROTECTED]> > >> > To: "'Fred Handscombe'" <[EMAIL PROTECTED]>; "'DXBase > >> > reflector'" <[email protected]> > >> > Sent: Monday, February 06, 2006 9:30 PM > >> > Subject: RE: [Dxbase] Special-1 import > >> > > >> > > >> > Hi Fred, > >> > If you want to add something to the Special-1 or -2 you can easily use > > the > >> > 'Populate Special Field 1' in the Non-DXB Import Utility. > >> > > >> > As far as I know there is not a list of the ADIF fields that DXbase > > uses, > >> > though I suspect you could export a short file and have a look-see. > >> > Perhaps > >> > someone has a complete list of ADIF fields used by DXB they would be > > kind > >> > enough to share with us. > >> > > >> > 73 Eric. > >> > > >> > > >> > -----Original Message----- > >> > From: Handscombe > >> > Sent: February 6, 2006 2:12 AM > >> > > >> > Hi All > >> > > >> > I think I ask this question very year or so! > >> > > >> > I have an ADIF data file. One field I want to import into Dxbase to go > >> > into > >> > > >> > the "Special-1" column. > >> > > >> > What do I call data this in the ADIF file? > >> > > >> > I have tried Special1 and Special-1 so far > >> > > >> > Can someone point me to the "help" files that lists all the ADIF > > headings > >> > for the DXbase log columns? I have searched with no luck! > >> > > >> > Thanks > >> > > >> > 73 Fred > >> > > >> > ______________________________________________________________ > >> > Dxbase mailing list > >> > Home: http://mailman.qth.net/mailman/listinfo/dxbase > >> > Help: http://mailman.qth.net/mmfaq.htm > >> > Post: mailto:[email protected] > >> > > >> > > >> > >> > >> ______________________________________________________________ > >> Dxbase mailing list > >> Home: http://mailman.qth.net/mailman/listinfo/dxbase > >> Help: http://mailman.qth.net/mmfaq.htm > >> Post: mailto:[email protected] > >> > > > > > >
