He was talking about printing on his Pre-Made QSL card.. but, the biggie here is that he wanted to design with the longest side being left-to-right, vice the "normal" vertical format.. Mike has already done his card all ok now..
73 Joe wa6axe ve3wej gmail wrote: > I print directly to a dxbase created qsl, is this what he means, or is > he talking about printing over top of a pre made qsl > ----- Original Message ----- From: "Joseph Glockner" <[EMAIL PROTECTED]> > To: "DXBase Reflector" <[email protected]> > Sent: Saturday, February 17, 2007 5:41 PM > Subject: [Dxbase] QSL card Layout and printing via DXbase > > >> Some of you may have seen Mike's (K3MH) email about >> printing directly to a QSL card - but not having >> the layout the normal vertical layout (in the label >> designer module). >> >> Since I have never needed to do what he wanted to do, >> I have experimented with the designer and found that >> YES - it can be done. >> >> Just FYI. >> >> 73 Joe wa6axe >> >> ______________________________________________________________ >> Dxbase mailing list >> Home: http://mailman.qth.net/mailman/listinfo/dxbase >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] > > > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > > From [EMAIL PROTECTED] Sat Feb 17 21:11:10 2007 From: [EMAIL PROTECTED] (Dick Dievendorff) Date: Sat Feb 17 21:15:36 2007 Subject: [Dxbase] QSL card Layout and printing via DXbase In-Reply-To: <[EMAIL PROTECTED]> References: <[EMAIL PROTECTED]> <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> I have a Laser printer that will print on both sides of a piece of paper. Can I use DxBase's label designer to print a standard W4MPY QSL card in such a way that the first (or only) QSO for any given station goes on the front in the right slots but any remaining QSOs with that same call sign are printed on the back of the card? Or even if all the QSOs are on the back and the front has the callsign and something like "confirming QSOs on the reverse of this card"? I'd like to send at most one piece of paper per callsign. Dick, K6KR
