Wayne, As are just about all of the cards.. but, that is not what Mike was concerned about. The concern was "within the DXbase Label Designer Module" - Mike wanted to be able to layout the card "horizontally" - but, have it print vertically in the printer.
NO Problem now .. He has been able to do what he wanted. Joe wa6axe Wayne Jones wrote: > 90% of the cards received at the Hawaii bureau are horizontal -- and not > just my own! I am the bureau manager for the Hawaii Bureau (KH6) and the > vast majority of the cards I sort are horizontal. > > > Aloha > Wayne, NH6K > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > On Behalf Of Joseph Glockner > Sent: Saturday, February 17, 2007 2:33 PM > To: ve3wej gmail > Cc: DXBase > Subject: Re: [Dxbase] QSL card Layout and printing via DXbase > > He was talking about printing on his Pre-Made QSL card.. but, the biggie > here is that he wanted to design with the longest side being left-to-right, > vice the "normal" vertical format.. Mike has already done his card all ok > now.. > > 73 Joe wa6axe > > > ve3wej gmail wrote: > > >>I print directly to a dxbase created qsl, is this what he means, or >>is he talking about printing over top of a pre made qsl >>----- Original Message ----- From: "Joseph Glockner" >><[EMAIL PROTECTED]> >>To: "DXBase Reflector" <[email protected]> >>Sent: Saturday, February 17, 2007 5:41 PM >>Subject: [Dxbase] QSL card Layout and printing via DXbase >> >> >> >>>Some of you may have seen Mike's (K3MH) email about printing directly >>>to a QSL card - but not having the layout the normal vertical layout >>>(in the label designer module). >>> >>>Since I have never needed to do what he wanted to do, I have >>>experimented with the designer and found that YES - it can be done. >>> >>>Just FYI. >>> >>>73 Joe wa6axe >>> >>>______________________________________________________________ >>>Dxbase mailing list >>>Home: http://mailman.qth.net/mailman/listinfo/dxbase >>>Help: http://mailman.qth.net/mmfaq.htm >>>Post: mailto:[email protected] >> >> >>______________________________________________________________ >>Dxbase mailing list >>Home: http://mailman.qth.net/mailman/listinfo/dxbase >>Help: http://mailman.qth.net/mmfaq.htm >>Post: mailto:[email protected] >> >> >> > > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > > > From [EMAIL PROTECTED] Sat Feb 17 22:43:50 2007 From: [EMAIL PROTECTED] (Wayne Jones) Date: Sat Feb 17 22:48:17 2007 Subject: [Dxbase] QSL card Layout and printing via DXbase In-Reply-To: <[EMAIL PROTECTED]> References: <[EMAIL PROTECTED]> <[EMAIL PROTECTED]> <[EMAIL PROTECTED]> <[EMAIL PROTECTED]> <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> Sory! I suppose I misread! These eyes are getting old and tired! Aloha Wayne, NH6K -----Original Message----- From: Joseph Glockner [mailto:[EMAIL PROTECTED] Sent: Saturday, February 17, 2007 5:41 PM To: Wayne Jones Cc: 've3wej gmail'; 'DXBase' Subject: Re: [Dxbase] QSL card Layout and printing via DXbase Wayne, As are just about all of the cards.. but, that is not what Mike was concerned about. The concern was "within the DXbase Label Designer Module" - Mike wanted to be able to layout the card "horizontally" - but, have it print vertically in the printer. NO Problem now .. He has been able to do what he wanted. Joe wa6axe Wayne Jones wrote: > 90% of the cards received at the Hawaii bureau are horizontal -- and > not just my own! I am the bureau manager for the Hawaii Bureau (KH6) > and the vast majority of the cards I sort are horizontal. > > > Aloha > Wayne, NH6K > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] > On Behalf Of Joseph Glockner > Sent: Saturday, February 17, 2007 2:33 PM > To: ve3wej gmail > Cc: DXBase > Subject: Re: [Dxbase] QSL card Layout and printing via DXbase > > He was talking about printing on his Pre-Made QSL card.. but, the > biggie here is that he wanted to design with the longest side being > left-to-right, vice the "normal" vertical format.. Mike has already > done his card all ok now.. > > 73 Joe wa6axe > > > ve3wej gmail wrote: > > >>I print directly to a dxbase created qsl, is this what he means, or >>is he talking about printing over top of a pre made qsl >>----- Original Message ----- From: "Joseph Glockner" >><[EMAIL PROTECTED]> >>To: "DXBase Reflector" <[email protected]> >>Sent: Saturday, February 17, 2007 5:41 PM >>Subject: [Dxbase] QSL card Layout and printing via DXbase >> >> >> >>>Some of you may have seen Mike's (K3MH) email about printing directly >>>to a QSL card - but not having the layout the normal vertical layout >>>(in the label designer module). >>> >>>Since I have never needed to do what he wanted to do, I have >>>experimented with the designer and found that YES - it can be done. >>> >>>Just FYI. >>> >>>73 Joe wa6axe >>> >>>______________________________________________________________ >>>Dxbase mailing list >>>Home: http://mailman.qth.net/mailman/listinfo/dxbase >>>Help: http://mailman.qth.net/mmfaq.htm >>>Post: mailto:[email protected] >> >> >>______________________________________________________________ >>Dxbase mailing list >>Home: http://mailman.qth.net/mailman/listinfo/dxbase >>Help: http://mailman.qth.net/mmfaq.htm >>Post: mailto:[email protected] >> >> >> > > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > > >
