I recently had a mother board go belly up so was forced to upgrade my PC. I now have a Dual Core system with 4 gig of ram but have encountered a problem with the new mother board. It does NOT have ANY serial ports.
I thought this would not present a problem as I have a Byte Runner PCI to 8 port serial card. There is one Com port on the system board but no cable to the rear nor any place to put a DB9 so I deactivated it so it is not seen. I then configured my Byte Runner to see Com 1 thru Com 8.. Here is what I have connected so far. Com 1=FT1000MP Com 2=TS2000X Com 3=W5XC Keyer Com 4=Rigblaster Com 5=Alpha 87 I can get the FT1000MP to work with no problem on Com 1 but when I click the icon to switch to Com 2 it still controls the FT1000MP but should control the TS2000X. I looked in my INI file and it seems OK so I am lost at this point. Anybody have any ideas? I am running XP Pro SP3 for the record. Any help will certainly be appreciated. Thanks and 73 de K8SIX BTW Byte Runner was bought out by VSCom ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
