i can control both the ts850 and ts790 by toggling, read and write, in 
dxb2006, but it is NOT simultaneous, which is ok for me...

Dave Garber
VE3WEJ/VE3IE


----- Original Message ----- 
From: "Tim Pepper" <[email protected]>
To: <[email protected]>; "Al Bailey" <[email protected]>
Sent: Monday, May 11, 2009 5:59 PM
Subject: Re: [Dxbase] Port problems..


> Hey Al, how's the nurse maid doing? I have found that the program reads 
> and
> controls radio 1 but only reads the radio 2 info. There is no control of
> radio 2. It doesn't work like the radio 1 and 2 setup on Logger 32. Fred
> found the same thing. Tim K8NWD
>
> ----- Original Message ----- 
> From: "Al Bailey" <[email protected]>
> To: <[email protected]>
> Sent: Sunday, May 10, 2009 11:33 PM
> Subject: [Dxbase] Port problems..
>
>
> I recently had a mother board go belly up so was forced to upgrade my
> PC. I now have a Dual Core system with 4 gig of ram but have
> encountered a problem with the new mother board. It does NOT have ANY
> serial ports.
>
> I thought this would not present a problem as I have a Byte Runner
> PCI to 8 port serial card. There is one Com port on the system board
> but no cable to the rear nor any place to put a DB9 so I deactivated
> it so it is not seen. I then configured my Byte Runner to see Com 1
> thru Com 8.. Here is what I have connected so far.
>
> Com 1=FT1000MP
> Com 2=TS2000X
> Com 3=W5XC Keyer
> Com 4=Rigblaster
> Com 5=Alpha 87
>
> I can get the FT1000MP to work with no problem on Com 1 but when I
> click the icon to switch to Com 2 it still controls the FT1000MP but
> should control the TS2000X.
>
> I looked in my INI file and it seems OK so I am lost at this point.
>
> Anybody have any ideas? I am running XP Pro SP3 for the record.
>
> Any help will certainly be appreciated. Thanks and 73 de K8SIX
>
> BTW Byte Runner was bought out by VSCom
>
> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[email protected]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[email protected]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html 

______________________________________________________________
Dxbase mailing list
Home: http://mailman.qth.net/mailman/listinfo/dxbase
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Reply via email to