Hey Al, how's the nurse maid doing? I have found that the program reads and controls radio 1 but only reads the radio 2 info. There is no control of radio 2. It doesn't work like the radio 1 and 2 setup on Logger 32. Fred found the same thing. Tim K8NWD
----- Original Message ----- From: "Al Bailey" <[email protected]> To: <[email protected]> Sent: Sunday, May 10, 2009 11:33 PM Subject: [Dxbase] Port problems.. I recently had a mother board go belly up so was forced to upgrade my PC. I now have a Dual Core system with 4 gig of ram but have encountered a problem with the new mother board. It does NOT have ANY serial ports. I thought this would not present a problem as I have a Byte Runner PCI to 8 port serial card. There is one Com port on the system board but no cable to the rear nor any place to put a DB9 so I deactivated it so it is not seen. I then configured my Byte Runner to see Com 1 thru Com 8.. Here is what I have connected so far. Com 1=FT1000MP Com 2=TS2000X Com 3=W5XC Keyer Com 4=Rigblaster Com 5=Alpha 87 I can get the FT1000MP to work with no problem on Com 1 but when I click the icon to switch to Com 2 it still controls the FT1000MP but should control the TS2000X. I looked in my INI file and it seems OK so I am lost at this point. Anybody have any ideas? I am running XP Pro SP3 for the record. Any help will certainly be appreciated. Thanks and 73 de K8SIX BTW Byte Runner was bought out by VSCom ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
